Home  > Haida Products  > Environment Test Chamber  > Aging Test Chambers  >  Ozone environmental aging test machine

Haida Equiment Manufacturer

Haida Equiment Manufacturer has more than 10 years experience for test equipment...

Ozone environmental aging test machine

Ozone environmental aging test machine

15 days after order.
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
L/C, D/P, T/T

Ozone environmental aging test machine

Product introduction:

Ozone environmental aging test machine simulation natural ozone environmental conditions to strengthen the atmosphere, to study the effect of ozone on the law of the rubber, rapid identification and evaluation method of anti ozone aging properties of rubber and antiozonants protection efficiency, and take effective measures to prevent aging

Main function:

Ozone environmental Test Chamber can be used for rubber products such as vulcanized rubber, thermoplastic rubber, cable insulation sheath and other products, under static tensile deformation, exposure to light and no exposure to constant ozone concentration of air and constant temperature of the test box, according to the scheduled time of the sample The degree of cracking or other properties that can occur from the surface of the specimen is measured to assess the ozone resistance of the rubber

Main feature:

1, the box CNC machine tool forming, no reaction door handle, easy to operate.
2, the tank liner with high-grade stainless steel, box outside the gallbladder with A3 steel spray, an increase of the appearance of texture and cleanliness.
3, the heating method for the heating body heating, heating up fast, uniform temperature distribution.
4, the door a reasonable location to set a transparent window, to observe the changes in indoor samples.

Corresponding standard:

JIS K 6259 , ASTM1149 , ASTM1171,   ISO1431,  DIN53509 , GB/T13642, GB/T 7762-2003

 GB 2951

Technical parameter: 

1, studio size: 500 × 600 × 500 150L

2, ozone concentration 0 ~ 1000pphm, PID settings.

3, ozone concentration deviation of 5%

4, Test sump temperature: RT ~ 85 ℃(Recommended temperature 40 ℃)

5, Test Position Humidity: 20 ~ 85 ℃(recommended humidity 65%)

6, Temperature uniformity: ±2 ℃

7, rack rotation speed: 2R/min adjustable

8,  sample pulled Frequency: 0.5Hz

9, Supply voltage: 220V ± 10%

To meet the standard: GB/T7762, GB/T13642 80T (inner: 40 * 50 * 40W * H * D) 225T (inner: 50 * 75 * 60W * H * D) 408T (inner: 60 * 85 * 80W * H * D) 800T (inner: 80 * 100 * 100W * H * D) 1000T (inner: 100 * 100 * 100W * H * D)

Leave a Message

Call me!