Home  > Haida Products  > Baby stroller / bicycle / Toys Testing Machine  >  Baby Carrier Tester (ASTM) HD-J204

Haida Equiment Manufacturer

Haida Equiment Manufacturer has more than 10 years experience for test equipment...

Baby Carrier Tester (ASTM) HD-J204

Baby Carrier Tester (ASTM) HD-J204

15 days after order.
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
L/C, D/P, T/T

Baby Carrier Tester (ASTM)

Standard Features:

1) Diameter 6~8 inches steel shot bag weighted 25lb (11.3kg), or a mass equal to the manufacturer’s recommended maximum weight

2) Drop the weight from 25 mm height above the seat of the soft carrier

3) Cycles time: 4+/-1S per cycle.

4) Estimated dimension: (L*W*D) 680*500*1400mm

5) Estimated weight: 150kg

6) Standard: ASTM F2236 Safety Specification for Soft Infant and Toddler Carriers

Dynamic Load Test:

Fasten the soft carrier to a test torso.
Position a weight of 25 lb (11.3 kg) using a 6 to 8 in. diameter shot bag a distance of 1 in. (25 mm) above the seat of the soft carrier. Drop the weight onto the seat ten times with a cycle time of 4 6 1s/cycle to preset the adjustment straps. By some appropriate means, mark the position of the adjustment hardware. This will be the start point of the remainder of the test. Drop the weight onto the seat an additional 990 times with a cycle time of 4 6 1s/cycle. If the product moves on the test fixture, adjust the fixture or product to maintain the 1 in. (25mm) drop height.

Static Load Test:

Fasten the soft carrier to a test torso.
Using a 6-in. (150-mm) standard weld cap, center a 75 lb. (34.0 kg) weight in the seat area of the soft carrier. Include the weight of the weld cap in the 75 lb (34.0 kg) weight. Gradually apply the weight within a 5 s period and maintain for an additional 1 min.

Detail Image:
Baby Carrier Tester (ASTM) HD-J204

Leave a Message

Chat Online(添加后请保存并刷新)
Inquire Online
Chat Online Click here chat
Chat Online $this->l('inputting');
Chat Online
Enter what you want to say here
    Send messages directly by Ctrl+Enter Send

    Do you want to send this image?

    Cancel Send
    Call me!