Chair Footrest Static Vertical Force Testing Equipment

Chair Footrest Static Vertical Force Testing Equipment
Chair Footrest Static Vertical Force Testing Equipment
prev
  • Chair Footrest Static Vertical Force Testing Equipment
  • Chair Footrest Static Vertical Force Testing Equipment
  • Chair Footrest Static Vertical Force Testing Equipment
  • Chair Footrest Static Vertical Force Testing Equipment
next
  • Chair Footrest Static Vertical Force Testing Equipment
  • Minimum: 1 SET
  • Delivery: 15 days after order.
  • Model: HD-F733-1
  • Country: China
  • BrandName: HD
  • Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
  • Payment: L/C, D/P, T/T
  • Price: FOB, CIF
  • Inquire Online

Product Information

Vertical Force Tester

Introduction

Chair Footrest Static Vertical Force Testing Equipment used for the vertical pressure testing, destructive testing and fatigue testing use of the office chair Ipomoea base (Star Base) repeated pressure loading in setting force test cycle, as the fatigue test. Pressure on the size of the holding pressure time and cycle number of tests can be adjusted.


Main Parameters:

1、Bifma × 5.1 Section 8

2、Output rated pressure:> 3000KG

3、Stroke 10 ~ 500 mm, adjustable speed range 0-50 mm pole control servo planetary reducer + domestic + servo motor

4、Can test the maximum five-star foot diameter less than 900mm

5、Dwell time, the machine, the light of the sample changes and automatically adjust and compensate for the pressure difference, stable pressure test packing process given.

6、The peak value of the machine with force, you can record the maximum damage value

7、Control mode: PLC and LCD display

8、Counter: 0 to 999,999 times, also choose a single cycle, in line with the requirements of the test standard。

9、The machine with iron mesh and shatterproof film protective cover to prevent debris pop-up specimen during testing.


Applicability

The footrest static load test shall be performed on all chairs with a footrest feature and a seat

height equal to or greater than (or can be adjusted to) 610 mm (24 in.).


Purpose of Test

The purpose of this test is to evaluate the ability of the footrest to withstand static loading

stresses.  

Messages

Message boardmin&max