Hand strollers lift down durable testing equipment

Hand strollers lift down durable testing equipment
Hand strollers lift down durable testing equipment
prev
  • Hand strollers lift down durable testing equipment
  • Hand strollers lift down durable testing equipment
  • Hand strollers lift down durable testing equipment
  • Hand strollers lift down durable testing equipment
next
  • Hand strollers lift down durable testing equipment
  • Minimum: 1 SET
  • Delivery: 15 days after order.
  • Model: HD-J203
  • Country: China
  • BrandName: HD
  • Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
  • Payment: L/C, D/P, T/T
  • Price: FOB, CIF
  • Inquire Online

Product Information

Brief  Introduction:

Hand strollers lift down durable testing equipment is to test the upholding and pushing durability property of the baby stroller according to ASTM Standards. The test method is: place the baby model in the stroller, leave the trailing wheel 150mm high from the ground when lifting the stroller; leave the front wheel 150mm high from the ground when pushing it, repeat this method continuously for 3000 times at the speed of 15±1 per minute, and check whether the stroller is damaged. The machine will stop automatically when it up to its set-up times, so there is no need to watch it.

 

 

Main Parameters:

 

Power of upholding and pushing

driven by pneumatic cylinder, can lift and push 50kg.

The fixed method of the handle

mobile or replaceable

Adjustable distance from the handle joint

300mm

Function of upholding and pushing

leave the trailing wheel 150mm high from the ground when upholding, leave the front wheel 150mm high from the ground when pushing.
 

Automatic timer

   LED, 1~9999 times

Testing space

  can be customized

Dimension of the machine

(L×W×H) 1650x1100x1900mm

Weight

850kg

Power

1∮, AC220V/ 50Hz

 

 


The usage:

1.Position the vehicle on a horizontal surface without the parking device applied.

2.Place the test mass as for the stability test. If the vehicle is designed for more than one child use any
number of appropriate test masses, up to one in each place intended to be occupied by a child.

3.Alternately raise and lower the handle(s) by applying a vertical force to the handle so that the rear wheels and
front wheels in turn are raised (120 ± 10) mm, measured at the start of the test from the floor and then lowered

in a controlled manner without pause (see Figure A).

4.Carry out the test for a total of 10 000 cycles at a frequency of (15 ± 2) cycles/min. 

Messages

Message boardmin&max