Shear Adhesion Tester

Shear Adhesion Tester
Shear Adhesion Tester
prev
  • Shear Adhesion Tester
  • Shear Adhesion Tester
next
  • Shear Adhesion Tester
  • Minimum: 1 SET
  • Delivery: 15 days after order.
  • Model: HD-C527-1
  • Country: China
  • BrandName: HD
  • Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
  • Payment: L/C, D/P, T/T
  • Price: FOB, CIF
  • Inquire Online

Product Information

Specifications

Shear Adhesion Tester 
1.Temperature Controller:PID control 
2.Safety Device:Overheating or power overload protection 

1. Product description

simulates the adhensive tape in hot temperature environment, and the auto-timer records the holding time of adhensive tape with specific load to confirm the effective time of adhension. The timer shall retain the tseting time automatically to assess the durability of adhensive tape in hot temperature enviroment when the tape falling down from the plate.


2. Specifications:



Shear Adhesion Tester  

Model

HD-C527-1

Test Fixture

10 groups (Timing independently)

Load

1 Kg  or designated

Timer

10 sets, 9999.9 hours

Temperature Controller

Normal Temp.~200 °c, PID control

Accuracy

0.1 °c

Heating System

Hot Air Circulation

Safety Device

Overheating or electric power overload protection automatically

Material

Inside: Stainless Steel;
Outside: Advanced steel plate (paint handling)

Inside Dimension (L×W×H)

45×50×45 cm

Outside Dimension (L×W×H)

97×65×110 cm

Weight

105 Kg

Power

1phase, AC220V, 15A

Design Criteria

CNS-11887/11888; PSTC-7; GB/T 4851


 3. Maintenance of Shear Adhesion Tester  


 3.1, Clean: keep the instrument clean at any time and wipe it by cotton cloth before and after use.

3.2, Anti- rust: spray antirust oil one time on the metal part in the surface of the instrument(wipe it out after spray 2h) .

3.3, Lubrication oil: refuel lubrication oil on the instrument driving components(screw stem) at fixed time(common lubrication oil is ok). 


4. Specimen preparation of Shear Adhesion Tester  


 After remove 3-5 rounds tape of the outmost lay of a roll of tape sample, unfasten the roll of sample with 

300mm/min velocity (uncover isolated layer with same velocity if the specimen is sheet tape). Get the specimenwith width 

25mm and length 100mm from central part of the tape in every 200mm distance. Unless otherwise specified, each group has

 more than 3 specimens. After unfasten the roll of the sample, it permits less than 3min to put if tensile deformation is large. 

In general, test the specimen at once after get it. Sticky part of the specimen can not be touched by hand and other things.


5.The picture of the machine:


7. Introduction of Haida

Haida International Equipment Co., Ltd sets its headquarters in Taichung. As the comprehensive manufacturer of precision 

detecting instrument, Haida has contributed to the development of global industry for a long time. In order to better serve clients in mainland, the company set up factories and offices in Dongguan in the early 21st century.

Haida equipment products are widely used in paper products, packaging, ink printing, adhesive tape, bags, footwear, 

leather, environment, toys, baby products, hardware, electronics, plastics, rubber and many other industries, and applicable to all scientific research units, quality inspection institutions, the academic fields of study; company's products meet UL, ASTM, JIS, GB, ISO, TAPPI, EN, DIN, BS ... and other domestic and international standards.


Messages

Message boardmin&max