Home  > Haida Products  > Tensile Test Equipment  >  Universal Testing Machine

Haida Equiment Manufacturer

Haida Equiment Manufacturer has more than 10 years experience for test equipment...

Universal Testing Machine

Universal Testing Machine

Minimum
1 SET
Delivery
10 days after order.
Country
China
BrandName
HD
Package
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Payment
L/C, D/P, T/T...
Price
FOB, CIF...


Universal Test Machine


  Universal Test Machine Video              Universal Test Machine Brochure



Product Description

Universal test machine is equipped with a single column 900mm vertical test space ,the test space is tested at 0.1~500mm/min (adjustable) test speed to reduce test time for the test materials which the test standard requested .

this type universal test machine actually
can efficiently assist in the inspection of QC, material research, standard validation, quality of related product inspection.The equipment uses the humanized industrial design, the light weigh, easy to move, can put on the table

Application Standard

Including but not limited to ASTM,JIS,CE, ISO,EN,BS EN,SAE,FTM...etc.

Application Industry

Paper,tape,fiber,film,plastic,rubber,leather,wire,cable,steel...etc

Application Test

1. Tested sample: plastic films, laminated materials, adhesive tapes, adhesive bandage (plaster), release paper, plastic films, leather, rubber & plastic, paper, fiber, wire, cable, steel etc.

2. Different test with different gripstensile, peel, tear, heat seal, adhesive, compression, bend and open force...etc.

3. Deformation under defined load: Test deformation under defined load of tested sample

4. Load under defined deformation: Test load under defined deformation of tested sample

5. Software can issue word/excel report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.

TM2101 software

The TM2101 software is designed purposely for computer controlled electronic universal testing machine,  used for tension, compress, bend, shear, tearing andpeel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force maximum deformation, yielding point and elastic modulus; this universal test equipment system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function.


 universal testing machine universal testing machine

 universal testing machine universal testing machine


Features:

1. High-Tech, Low Noise

2. Humanized Industrial Design, Easy To Place And Transport

3. Security Protection System

4. Technical Engineer Support After Service

5. Manufacturers Direct Sales, Factory Prices

6. 1 Year Warranty, Free The Use Of Equipment Manual

7. Sales In Stock, Fast Delivery Time



                                                                           



Item

Description

Frame capacity

200kg(can be optional)

Load cell brand

Germany brand load cell for high accuracy

200kg (5,10,50,100kg are optional)

Load accuracy

0.5% F.S

Control system

LCD with build-in printer /PC with windows 7 system

Motor

Panasonic servo motor w/AC variable speed drive system, high-precision mechanical ball screw rod

Force reading 

kgf, Ibf, N, KN, T etc

Vertical test space

900mm including fixture

Test speed

0.1~500mm/min (adjustable)

Software

TM 2101

Curves display

Load- elongation, Elongation-time, Time-elongation, Stress-strain

Data display

Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc…

Safety features

E-Stop

Over-load protection

Upper and lower limit switches

Load sensor with automatic retreat 

The table parameters is for the company Standard Model parameters, our haida equipment manufacturer support customization parameters


What is tensile strength test procedure?

The sample was grasped at both ends with fixtures and the fixtures pulled slowly on the sample longitudinally until it broke. Tensile force is called load and the load is made according to the length change or displacement of the material. The load is converted to a stress value and the displacement is converted to a strain value.


What is the price of a tensile test machine?

Tensile test machines from haida is for different test materials and different test force values range, the price is not the same, if you want to know the price of specific products, please contact us.


How much force test can tensile test machine reach?

In order to meet the different test requirements of users, Haida provides a variety of force testing machines, the minimum force testing range can reach 5kn, the maximum testing range can reach 200T, in addition, Haida can also produce machines with user-specified force range.


What parts do tensile test machines have?

In order to help users to save costs, so that a machine can do different types of tests, Haida has developed different fixtures to meet the different testing needs of users. The types of fixtures include: tension, compression, tearing, bending, peeling , broken, etc.


How to calibrate tensile test machines?

Haida technicians use our portable calibration equipment to calibrate the measuring equipment on the pulling machine. When calibrating the machine, the reference point of the measuring equipment is compared with internationally recognized calibration standards to meet international testing standards, such as ASTM, EN, ISO, JIS,etc.


What is the working principle of tensile test machine?

The sample is clamped between the two clamps of the tensioner clamp. The two clamps move relative to each other. The force value sensors in the clamp and the built-in displacement sensor in the machine collect the changes in the force during the test. And displacement changes, to calculate the sample tensile, tear, deformation rate and other performance indicators.


Can tensile test machines do indirect tensile strength tests?

Yes, Haida can attach a circular pressure plate fixture to the tension machine,a cylindrical material is loaded radially on a circular cross section. Loading causes tensile deformation perpendicular to the loading direction, which causes tensile failure. By recording the ultimate load and knowing the dimensions of the material, the indirect tensile strength of the material can be calculated.


Can tensile machines be used for steel tensile testing?

Yes,Steel is one of the most common engineering materials. Analyzing the ultimate tensile strength of steel and alloy metals is a common method of selecting steel. The tensile test method of Haida tensile test machine can evaluate the stress-strain response and help the user to select the most suitable steel.


Feedback

LEVI DE OLIVEIRA BUENO

Please send quotation for universal testing machine model (200 kgf capacity, 0,1 - 500 mm/min speeds, with TM2101 software).
2018-03-30 20:42:29
1

Leave a Message

社媒暂无评论
Chat Online
Call me!