Temperature humidity test chamber

Temperature humidity test chamber
Temperature humidity test chamber
prev
  • Temperature humidity test chamber
next
  • Temperature humidity test chamber
  • Minimum: 1 SET
  • Delivery: 15 days after order.
  • Country: China
  • BrandName: HD
  • Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
  • Payment: L/C, D/P, T/T
  • Price: FOB, CIF
  • Inquire Online

Product Information

Temperature humidity test chamber


Product Description:

Temperature humidity test chamber EN 14511
can quickly and accurately simulate natural environmental conditions.and test chamber test specimen can not only do -70 ~ + 150 ℃ temperature and environmental testing, but also can do 20 ~ 98% R.H humidity environmental testing.Simulation of the environment a wide range of climate, while the size of the Temperature humidity test chamber and simulated environmental climate temperature humidity index values can be customized.

Temperature Humidity Chamber is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.

Use:
Temperature Humidity Chamber is suitable for electronic, electrical, communications, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products testing quality.

climatic chamber

Meet the standard EN 14511:
⒈ GB11158 high temperature test chamber technical conditions
⒉ GB10589-89 low temperature test chamber technical conditions
⒊ GB10592-89 high and low temperature test chamber technical conditions
⒋ GB / T10586-89 hot and humid test box technical conditions
⒌ GB / T2423.1-2008 low temperature test chamber method
⒍ GB / T2423.2-2008 Test method for high-temperature test chamber
⒎ GB / T2423.3-2006 heat chamber test methods
⒏ GB / T2423.4-2008 Damp heat test method change
⒐ GB / T2423.22-2002 temperature Test Method
⒑ IEC60068-2-1.1990 temperature chamber test methods
⒒ IEC60068-2-2.1974 high temperature chamber test methods
⒓ GJB150.3 high temperature test
⒔ GJB150.4 low temperature test
⒕ GJB150.9 hot and humid test


Standard Features

Item

Specification

Internal dimension

(W*D*H) 400*500*500mm

External dimension

(W*D*H) 900*1070*1400mm

Temperature range

-70~+150

Temperature Accuracy

±1

Humidity range

20~98%R.H. (Refer Image below)

Humidity accuracy

±3%R.H

Cooling speed

1/min in average (without loading)

Heating speed

3/min in average (without loading)

Internal chamber material

SUS#304 stainless steel, mirror finished

External chamber material

Stainless steel with paint spray

Cooling method

Air cooling

Controller

LCD touch screen, programmable control temperature and humidity

Can set different parameter for cyclic test

Insulation material

50mm high density rigid Polyurethane foam

Heater

Explosion-proof type SUS#304 stainless steel fins radiator pipe heater

Compressor

France Tecumseh compressor

Lighting

Heat resistance

Temperature sensor

PT-100 dry and wet bulb sensor

Observation window

Tempered glass

Testing hole

Diameter 50mm, for cable routing

Sample tray

SUS#304 stainless steel, 2pcs

Safety protection device EN 14511

Protection for leakage

Over-temperature

Compressor overvoltage and overload

Heater short circuit

Water shortage

 


Humidity Range:


      20 to 98%RH per chat (no live load)

Internal Chamber:

cimatic chamber 4


Product Features:

1. Material quality of inner box is SUS304 # mirror-face stainless steel imported, and outer box is steel plate and the paint. Box body is processed shape using CNC machine tool, its shape is beautiful and fine.

 2. Heat preservation material used glass fiber cotton of high-intensity PU foam and high density, which can avoid unnecessary energy loss.

 3. Large glass window design, viewing angle in all directions, hollow electric plating film and anti-condensation design, built-in lights to facilitate the test sample state of real-time observation in the course of testing.

 4. Large-size LCD display screen, simple operation, easy to edit programs. PID with automatic calculation function, show failure message .

5. An RS-232 communication interface, matching recorder, strong expandability.

6. with timing contact, and be able to cope with dynamic testing and measure test.

7. The system-wide multi-security protection and power-cut memory.

8. Freezer imported by the French original armored warrior compressor and use environmental-friendly refrigerant (R134a, R404a, R23).

9.  Frozen system uses units or low-temperature dual-loop system design.

10. Use more powerful wing-blower air supply cycle, to avoid any dead end, temperature and humidity are evenly distributed in the test region.

11. Wind-road cycle adopted the design of blowing side wind and return wind. Wind pressure and wind speed are in accord with test standards, and make the door instantaneous temperature and humidity open that is stabilized time soon.

12. Heating, cooling, humidification and dehumidification system is totally unaided to improve efficiency, reduce testing cost, increase life expectancy and lower failure rate.



Programmable Controller:

1. PIC controller for test chamber

2. Step types include: ramp, soak, jump, auto-start, and end

3. RS-232 interface to connect computer for output


Customer feedback:


Related Products:

We are able to produce and sell climatic chamber of different sizes and different detection parameters.
If you w
ant to know more details,please contact us "manager@qc-test.com"

Climatic Chamber Type: Specification Chamber Size and Weight
(W*D*H mm / kg)  
Number experimental 
space
HD-E702-100 
climatic chambe
volume:100L
Temperature range: -40 ~ 150
Humidity range: 20% ~ 98%RH
Internal dimension: 400*500*500 
External dimension: 600*1080*1380 
Weight: 150KG
Temperature range: -70 ~ 150℃ 
Humidity range: 20% ~ 98%RH
Internal dimension: 400*500*500 
External dimension: 600*1280*1380 
Weight: 200KG
HD-E702-150 
climatic chamber
volume:150L
Temperature range: -40 ~ 150
 Humidity range: 20% ~ 98%RH
Internal dimension: 500*500*600 
External dimension: 700*1080*1480 
Weight: 200KG
Temperature range: -70 ~ 150℃ 
Humidity range: 20% ~ 98%RH
Internal dimension: 500*500*600 
External dimension: 700*1280*1480 
Weight: 260KG
HD-E702-225 
climatic chamber
volume:225L
Temperature range: -40 ~ 150℃ 
Humidity range: 20% ~ 98%RH
Internal dimension: 500*600*750 
External dimension: 700*1180*1630 
Weight: 300KG
Temperature range: -70 ~ 150℃ 
Humidity range: 20% ~ 98%RH
Internal dimension: 500*600*750 
External dimension: 700*1280*1630 
Weight: 360KG
HD-E702-408 
climatic chamber
volume:408L
Temperature range: -40 ~ 150℃ 
Humidity range: 20% ~ 98%RH
Internal dimension: 600*800*850 
External dimension: 800*1380*1730 
Weight: 400KG
Temperature range: -70 ~ 150℃ 
Humidity range: 20% ~ 98%RH
HD-E702-800 
climatic chamber
volume:800L
Temperature range: -40 ~ 150℃ 
Humidity range: 20% ~ 98%RH
Internal dimension: 1000*800*1000 
External dimension: 1500*1180*1900 
Weight: 600KG
Temperature range: -70 ~ 150℃ 
Humidity range: 20% ~ 98%RH
HD-E702-1000 
climatic chamber
volume:1000L
Temperature range: -40 ~ 150℃ 
Humidity range: 20% ~ 98%RH
Internal dimension: 1000*1000*1000 
External dimension: 1500*1380*1900 
Weight: 700KG
Temperature range: -70 ~ 150
 Humidity range: 20% ~ 98%RH











































If you want to know more details,please contact us "manager@qc-test.com"



See what company you will work with?

1. Largest TESTING EQUIPMENT manufacturer in China, One of Second Largest TESTING EQUIPMENT manufacturer around the world.

2. Professional Manufacturer of various kinds of testing equipments over10 years, defect rate is controlled under 0.02%.

3. Completely Production Line. From Raw Material to Delivery, all links are under our control. The quality can be assured.

4. ISO 9001:2008 Quality Management System Certificate.

5. OEM/ODM Service. Just tell us your idea! Our R&D Team is standing by…

6. Our Marketing Investigation Department will send Marketing Research Report to you each season.

7. We are trusted by SCS, INTERTEK, HST, COFCO, ESC, KBMC, LENOVO, PANASONIC, EMC, etc.

8.We accept 100% inspection.

9. Guarantee Period: 365 days, After Sales Service Department provides professional service with you, any questions, just contact us.


Messages

Message boardmin&max