Environment Thermal Shock Chamber

Environment Thermal Shock Chamber
Environment Thermal Shock Chamber
prev
  • Environment Thermal Shock Chamber
  • Environment Thermal Shock Chamber
  • Environment Thermal Shock Chamber
next
  • Environment Thermal Shock Chamber
  • Minimum: 1 SET
  • Delivery: 15 days after order.
  • Model: HD-E703-50A
  • Country: China
  • BrandName: HD
  • Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
  • Payment: L/C, D/P, T/T
  • Price: FOB, CIF
  • Inquire Online

Product Information

Environment Thermal Shock Chamber


Download: Environment Thermal Shock Chamber.PDF

Product Introduction:

Environment Thermal Shock Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.


The Environment Thermal Shock Chamber is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB…

 

Features:

1. Perfect appearance and easy to operate.

2. Japan LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.

3. Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable.

4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…

5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.

6. Cold and hot shock temperature recover within 5 minutes, which complies with MTL, IEC, JIS, GJB and other international standards.

7. With RS-232C communication port for connecting PC to control, record and save test report.

 

Main parameters:

Test method

Pneumatic operated door switch 3 chambers

Inner dimension (W*D*H)

500*450*450mm

External dimension (W*D*H)

1380*1370*1980mm

Temperature range

-40 ~ +80

High temperature chamber pre-heating range

60 ~ 100

Heating speed

+60→+100 about 10 minutes

Low temperature chamber pre-cooling range

-65 ~ 0

Cooling speed

Ambient →-65 about 65 minutes

Temperature deviation

±3

Thermal recovery time

Within 5 minutes

External material

Antirust processing cold-rolled steel sheet

Internal material

SUS#304 stainless steel

Thermal insulation material

Polyurethane foam and fiberglass

Coolant

R404A / R23

Cooling method

Air cooling

Pressure

0.2 - 0.5Mpa

Power supply

Three phase, 380V, 50Hz


(thermal shock chamber/high low temperature chamber) Related Products:

Model / Link

Interior Dimensions(W x D x H)

Temperature Range

Notes

HD-E703-18

320x230x250mm

 -50℃- +175℃

Within 5 minutes / 2 working chambers

HD-E703-100

500*450*450mm

 -40℃ - +80℃

Within 5 minutes /  3 working chambers

Want to know more details,please contact us "manager@qc-test.com"



High temperature chamber:

Heater: NI-CR alloy electric heater

Draught fan: Share centrifugal fan when high temperature and do environmental temperature, preheating with axial flow fan.

 

Low temperature chamber:

Cooler: Fin cooler, regenerator

Draught fan: centrifugal fan

 

Drive device:

Pneumatic cylinder: Drive the air door of high, environmental, low temperature

Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)

 

Refrigerating device:

Cooling method: mechanical compression refrigeration

Refrigeration compressor:  Semi-closed piston

Refrigerant: R23/R404A

Condensation: Stainless steel welded plate heat exchanger

 

Controller:

Operate interface: 6" color LCD touch screen

Program memory capacity: 100 groups (modify by operator)

Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 999 cycles

Resolution: temperature: 0.01 ; time: 1 minute

Input: T thermocouple

Control method: P.I.D control

 

Additional functions:

Timer, over temperature and power failure protection, alarm, record test curve, emergency stop, display test time

Circulated cooling water: pressure: 0.20.4MPa, temperature: ≤30

Standard configuration: indication lamp of test chamber, time meter, test hole for wire routing, 6pcs castor, 4pcs adjust wheel.

Safety devices
:

Leakage and breaker, over temperature, low temperature protect device, exhaust valves, sample power control terminal, over temperature protection of high and low chamber, compressor over pressure, over heat protection, out of water relay, heat relay of fan, compressed air pressure switch, fuse, external alarm terminal

 

 product view:



Download: Environment Thermal Shock Chamber.PDF


Customer feedback:


Our Services

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

1. Pre-service

   --24 Hours online service for your consult.

   --Help choose right model,and a series of service,person,advise.

2. Middle service

    --Give you best offer

    --Provide discount for many sets order

    --Do customer's request:

    --Choose payment term you convienent.

    --Promptly production and delivery,inform you in time.

    --Can provide invoice value as you like to decrease your tax.    

3. After sale service :

   --1 year warranty service and all life maintenance.

   --Technical Egineer are avalible for oversea trainning.

   --Free change for some parts

   --Remote control technical consult

   --Free installation DVD

   --Maintenance plan

4,Commitment:

   We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

5,Good Packaging:  

  Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc. 

 


Packaging & Shipping

  Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

 

FAQ:
 Q:Are your company a trading one or a factory?
A:Factory + trade (integration),More than 12 years focusing on test equipment field,6 years exporting experience.
 Q:What about the warranty with after - sales services?
A:The testing machine is guaranteed for 12 months by HAIDA,we can help you to repair your problem controller freely,even it's not from our factory. After the warranty, the professional aftersales service team will provide perfect technical support and help guests solve  problems encountered while using our product, handles guest problems and complaints in a professional and timely.
 Q:What about the  product' services and quality?
A:Each equipment must be carried out 100% quality examination and test when shipping and delivery goods. Product use training, each of our product provide video training to show you how to install & operate.  We can arrange engineer to train the operation of equipment to customer’s company when you need. products are widely recognized and trusted by users.
 A :Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Send" Now!




Messages

  • H.M. Rokibul Hassan

    I have seen the specification of HD-E703-50A , i will add temperature sensors, power line and loading wires to the test specimen and then put in the chamber. Then i will set a fixed temperature/ a cycling temperature in the chamber. Can these model meet this requirement? or suggest me a perfect one.
    2016-12-01

1

Message boardmin&max