Home  > Haida Products  > Environment Test Chamber  > Aging Test Chambers  >  Ventilation type aging testing chamber

Haida Equiment Manufacturer

Haida Equiment Manufacturer has more than 10 years experience for test equipment...

Ventilation type aging testing chamber

Ventilation type aging testing chamber

Minimum
1 SET
Delivery
15 days after order.
Model
HD-E701
Country
China
BrandName
HD
Package
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Payment
L/C, D/P, T/T
Price
FOB, CIF

Ventilation type aging testing chamber

Product introduction:

Ventilation type aging testing chamber was used to measure the performance of the sample in the air under simulated high temperature and atmospheric pressure


protective device:
Test space temperature fuse
Fan motor overheated
Over temperature
Overall equipment phase / reverse phase
Overall equipment timing
Leakage Protection
The power distribution control cabinet opens the power failure protection
Automatic shutdown after fault alarm



Corresponding standard

Accord with ASTM D5423-9(R2005)(Ⅱ-Type oven)and ASTMD 5374-93(2005) UL-1581、GB、VDE、JIS、IEC 


Applicable industries

The aging tank used to test the material heat-resisting for polymer materials (plastics, plastic) and electrical insulation materials, such as: wire and cable sheathing, heat-shrinkable tubing, rubber or PVC materials.


Main parameters:

Model:HD-E701

Testing space:About 45×50×45cm

Temperature:RT~200℃,resolution: 0.1℃,accuracy: 0.5℃

Rotation:0~10 or 10~200 time/H

Ventilation adjusted:Auto-tuning type

Ventilation system:Using voltage regulator to change the volume of air, convenient to adjust

Built-in circulating air system:ensure the temperature uniformly:1%(count at the highest temperature)

Material:SUS#304 stainless steel

Protector:Over-temperature breaker

control system:

1. TCM control system can make the amount of increase heat is equal   to heat of los

2. With P.I.D automatic calculation function, precision temperature control

sensor:high-accuracy PT100 thermocouple。temperature fluctuation 0.5%(count at the highest temperature)

inside size:50cm(L)x 40 cm(D)x 50 cm(H)

outside size:120cm(L)x 65 cm(D)x 134 cm(H)

insulation:80mm rock wool

Count the volume of air:Formula for Japan JIS7212 N = 3590(X-Y)

X: the consumption of electricity in ventilation WH。

Y: the consumption of electricity in no ventilation WH。     

V: volume (cm3)

D: Density of air(g/cm3)

T: temperature contrast between inside and outside

Leave a Message

社媒暂无评论
Contact
Call me!