Home  > Haida Products  > Furniture Test Equipment  > Sofa Test Equipment  >  Sofa Seat Arm and Back Testing Machine
Haida Equiment Manufacturer

Haida Equiment Manufacturer has more than 10 years experience for test equipment...

Sofa Seat Arm and Back Testing Machine

Sofa Seat Arm and Back Testing Machine

15 days after order.
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
L/C, D/P, T/T


 Sofa Seat, Arm and Back Tester Video                      Sofa Seat, Arm and Back Tester PDF

1.Sofa Seat, Arm and Back Testing Machine Main technical parameters


Senor accuracy: 0.3%

Control panel: programmable LCD touch screen controller

Maximum specimen size: (L×W×H) 2200×1200×1200mm

Seat load: 0~200kg (adjustable)

Back load: 0~100kg (adjustable)

Test cyclic: 0~999,999 (adjustable)

Machine weight:400kg

Power:1 phase ,AC220V,50Hz

Air pressure:7kg/cm2

Design criteria: EN4875





Sofa Seat, Arm and Back Testing Machine is to simulate normal functional use to determine the strength of the sofa structure by applying to various parts with loads or forces. Using certain shape and load modules, with specific form, frequency, respectively, repeating load seat, back and armrest. Each point have force sensor to show the pressure.



3.Main Parameters:


Sofa Seat, Arm and Back Testing Machine consists form severalparts

  • Tension mechanism, servomotorandthe strappulleyarchitecture, the intensityoftherotationtransformed intotensionandsupplementedforcevaluesturnsensorread correctlytension, theactionoftheclosed-loopcontrol ofservo motorto achievea number ofpull. Staticand cyclictesting.Rallyand speedcan be set free. Mainly used for5, 6,13,14,15, and16test.

  • In addition to this machine is also configured with two groups of electric actuator, respectively, for a group of the vertical apparatus and the horizontal apparatus 1 group, each group independently adjust the speed and thrust. Stroke is 500mm

  • Theverticalmeansof the servo motorcan be used forthe actuator, thevertical positionadjustment,mainly used forthefirst11.4,22,23and24of the test; themaximum pressure is150 kg.

  • Leveldevice servo motor caused the brake position adjustment of the pieces up and down and left and right mobile and flexible to meet the demand for different test location, is mainly used for 10,12.3 and 12.4 testing. 50 kg maximum thrust, adjustable up and down the range from 500 mm to 1200 mm。

  • thebottom plate of the test machine drilling multiple rows of screw holes for easy installation of different

attachmentsand fixed test conditions

  • each electric actuator front-end with a quick connector for easy replacement of the load block and fixture

  • controlmode: PLCwith LCD touch screen

  • themaximumtensionvalue:150kg

  • themaximum thrustvalue(horizontal):50kg

  • themaximum pressure value(Vertical)150kg

  • Can be equipped with computers, recording force and displacement changes.




Leave a Message