Baby stroller / bicycle / Toys Testing Machine Series
Haida is a professional wholesale Baby Stroller&Bicycle, Toys Testing Machine manufacturers and factory which can produce the products according to your requirements...
-
Hand Strollers Lift Down Durable Testerraised and pressured hand-push pram to over obstacle to test the durability of hand-push pramInquire
-
ASTM F2236 Baby Carrier TesterThe stroller detection in accordance with state laws and regulations and relevant standards, to determine the primary means of stroller products as well as raw material qualityInquire
-
Strollers hand test equipmentThe test method is: place the baby model in the stroller, leave the trailing wheel 150mm high from the ground when lifting the stroller; leave the front wheel 150mm high from the ground when pushing it, repeat this method continuously for 3000 times at thInquire
-
Baby handlebar rotation testing machineDescription: 1) in the stroller handle the process of rising and under pressure to assess the rationality of the structural strength in the hand; 2) Power: 220 volt 200 watt, gas source 7 Kg/cm2Inquire
-
Stroller uneven road testing machineStroller uneven road testing machine simulation stroller walk on road conditions adverse road, the wheels do reciprocating after impact.Inquire
-
Impact Test Rig For Manufacturing ToysImpact test rig : To reduce the material damage due to manufacturing toys or imitation protective device protective device as true face the danger .Inquire
-
Stroller lift pressure durability testerStroller lift pressure durability tester is to test the upholding and pushing durability property of the baby stroller according to ASTM Standards.Inquire
-
Stroller stability testing platformStroller stability testing platform is placed on the test plane of the tilt angle of 12 °, do not use the parking device, first for the front, then rear-facing, then the vehicle lateral placed on an inclined plane, for each test, giving waywheels closeInquire
-
Dynamic road Bicycle testing machineDynamic road Bicycle testing machine is suitable to test bike’s run test& brakes performance test. Dynamic road Bicycle testing machine is formed by two rollers with varied diameter and follows specification to install jump plates at bike’s seat post. pInquire
-
Dynamic road bike run testing machineDynamic road bike testing machine is suitable to test bike’s run test& brakes performance test. Dynamic road bike testing machine is formed by two rollers with varied diameter and follows specification to install jump plates at bike’s seat post. pedals, bInquire
-
stroller 100 degree rotary table (electric)Testing purposes: the dynamic, the infant carrier or seat fixed on the frame of the device must not break down, loose or may not have any damage in the test or test.Inquire
-
stroller brake abrasion testing machineThe brake abrasion testing machine is used to test the wheel abrasion property on the baby stroller with brakeInquire
-
stroller carriages 100 ° turntableTesting purposes: the dynamic, the infant carrier or seat fixed on the frame of the device must not break down, loose or may not have any damage in the test or test.Inquire
-
Stroller dynamic endurance test machineStroller dynamic endurance test machineaccording to CNShandpushbaby carriagesdynamicdurabilitytestspecificationproduced.Inquire
-
American Standard Baby Carrier Testera backing band to withstand shock up and down, to assess the firmness of the tie-down straps.Inquire
-
Bike dynamic road testing machineBike dynamic road testing machine is suitable to test bike’s run test& brakes performance test. The tester is formed by two rollers with varied diameter and follows specification to install jump plates at bike’s seat post. pedals, bars, luggage carries, wInquire