العربيةASTM-D1238 PP and PE Melt Flow Testing Machine is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin
Inquire
Inquire
PP and PE Melt Flow Testing Machine is based on designed and manufactured according to latest national and international standards. Its advantage to combined various machine of domestic and international models: compact structure,beautiful appearance Base
Inquire
Inquire
thermal deformation Vicat softening point temperature tester is mainly applied to thermal deformation temperature and Vicat softening point temperature determination of plastic, hard rubber, nylon...
Inquire
Inquire
Pendulum Impact Testing Equipment
1.Used to test the fastness of plastic material
2.Digital dispaly
3.Capacity optional
Inquire
Inquire
Melt Flow Index testing equipment is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics.
Inquire
Inquire
Melt Flow testing machine
1.Melt Flow Indexer is used to determine melt-mass flow rate .
2.High quality,melt indexer
3.Direct factory
Inquire
Inquire
Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment.
Inquire
Inquire
Combustion testerisused for burningseveralflame at a certain height and angle f the test specimenwhen the specimen is horizontal or verticalby using the required sizeof theBunsen burner
Inquire
Inquire
Melt flow rate tester with industrial PLC programmable controller, LCD operating platform, temperature part is separate temperature unit, LED digital display.
Inquire
Inquire
Thermal deformation、Vicat softening point temperature tester is mainly applied to thermal deformation temperature and Vicat softening point temperature determination of plastic, hard rubber, nylon...
Inquire
Inquire
Dupont Impact Tester is used for testing the firm degree ofthe plastic, ceramic, acrylic, glass fiber materials and coatingmaterial.
Inquire
Inquire
pendulum impact testing machine for the Izod impact testing machine is mainly used for testing the impact resistance of plastic products.
Inquire
Inquire
Falling ball impact test machine for plastic / ceramic / glass fiber and other materials fastness testing.
Inquire
Inquire
Pendulum Impact Testing Machine is used for impact toughness determination of rigid plastics, enhanced nylon, glass fiber reinforced plastics, ceramics, cast stone, insulation material and other non-metal materials.
Inquire
Inquire
Melt Flow testing for PP and PE
1.Melt index tester is used to determine melt-mass flow rate (MFR).
2.High quality,melt indexer
Inquire
Inquire
Rockwell hardness machine (mold hardness) is widely used for hardened steel, hard alloy and metalmaterial and unhardened steel (copper alloy, quenching and tempering, annealing of steel
Inquire
Inquire
-
ASTM-D1238 PP and PE Melt Flow Testing MachinesASTM-D1238 PP and PE Melt Flow Testing Machine is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resinInquire
-
PP and PE Melt Flow Testing MachinesPP and PE Melt Flow Testing Machine is based on designed and manufactured according to latest national and international standards. Its advantage to combined various machine of domestic and international models: compact structure,beautiful appearance BaseInquire
-
thermal deformation Vicat softening point temperature tester HD-R801-1thermal deformation Vicat softening point temperature tester is mainly applied to thermal deformation temperature and Vicat softening point temperature determination of plastic, hard rubber, nylon...Inquire
-
Pendulum Impact Testing Equipment HD-R802Pendulum Impact Testing Equipment 1.Used to test the fastness of plastic material 2.Digital dispaly 3.Capacity optionalInquire
-
Melt Flow Index testing equipment HD-R803-1Melt Flow Index testing equipment is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics.Inquire
-
Melt Flow testing machine HD-R803Melt Flow testing machine 1.Melt Flow Indexer is used to determine melt-mass flow rate . 2.High quality,melt indexer 3.Direct factoryInquire
-
Melt flow rate test equipment HD-R804Melt flow rate tester (also known as melt index meter) was measured under certain conditions thermoplastic melt flow rate of the special equipment.Inquire
-
combustion tester HD-R807Combustion testerisused for burningseveralflame at a certain height and angle f the test specimenwhen the specimen is horizontal or verticalby using the required sizeof theBunsen burnerInquire
-
Melt flow rate tester HD-R804-1Melt flow rate tester with industrial PLC programmable controller, LCD operating platform, temperature part is separate temperature unit, LED digital display.Inquire
-
Thermal deformation、Vicat softening point temperature tester HD-R801-1Thermal deformation、Vicat softening point temperature tester is mainly applied to thermal deformation temperature and Vicat softening point temperature determination of plastic, hard rubber, nylon...Inquire
-
Dupont Impact Tester HD-R604Dupont Impact Tester is used for testing the firm degree ofthe plastic, ceramic, acrylic, glass fiber materials and coatingmaterial.Inquire
-
Plastic Impact Tester HD-R602pendulum impact testing machine for the Izod impact testing machine is mainly used for testing the impact resistance of plastic products.Inquire
-
Falling ball impact test machine （automatically） HD-R601Falling ball impact test machine for plastic / ceramic / glass fiber and other materials fastness testing.Inquire
-
Pendulum Impact Testing Tester HD-R802Pendulum Impact Testing Machine is used for impact toughness determination of rigid plastics, enhanced nylon, glass fiber reinforced plastics, ceramics, cast stone, insulation material and other non-metal materials.Inquire
-
Melt Flow testing for PP and PE HD-R803Melt Flow testing for PP and PE 1.Melt index tester is used to determine melt-mass flow rate (MFR). 2.High quality,melt indexerInquire
-
Rockwell hardness test machineRockwell hardness machine (mold hardness) is widely used for hardened steel, hard alloy and metalmaterial and unhardened steel (copper alloy, quenching and tempering, annealing of steelInquire
I am product title
Pieces
Name：
Content：
E-mail：
社媒暂无评论
