Foam Tear Resistance Test Machine

1 . Usage:

Foam Tear Resistance Test Machine is used to test the tensile strength , tearing force , peeling and adhesive force- the physical property of strength resistance .

2 . Theory :

Foam Tear Resistance Test Machine adopts the electronic tensile meter , use the motor to make displacement of the fixture .

Place the fixture with sample between the upper and lower fixture , use a given speed to pull the upper fixture upward , and the upper load cell with sensor the tensile strength , and convert the strength into voltage sign and output to the display screen . And the strength value will be displayed automatically .

3 . Standards:

The applicable standards of this machine:GB/T 16491,GB/T 1040,GB/T 8808,GB/T 13022,GB/T 2790,GB/T 2791,GB/T 2792,GB/T 16825,GB/T 17200,GB/T 3923 . 1,GB/T 528,GB/T 2611,GB/T 6344,GB/T 20310,GB/T 3690,GB/T 4944,GB/T 3686,GB/T 529,GB/T 6344,GB/T 10654,HG/T 2580,JC/T 777,QB/T 2171,HG/T 2538,CNS 11888,JIS K6854,PSTC-7,ISO 37,AS 1180 . 2,BS EN 1979,BS EN ISO 1421,BS EN ISO 1798,BS EN ISO 9163,DIN EN ISO 1798,GOST 18299,DIN 53357,ISO 2285,ISO 34-1,ISO 34-2,BS 903,BS 5131,DIN EN 12803,DIN EN 12995,DIN53507-A,DIN53339,ASTM D3574,ASTM D6644,ASTM D5035,ASTM D2061,ASTM D1445,ASTM D2290,ASTM D412,ASTM D638,ASTM D3759/D3759M

4. Instruction:

1 . Power switch : main switch of the machine

2 . Power indicator light : The power indicator light will be on when power on . It will be off when power off or electricity is not ok .

3 . Emergency switch : This key can help to stop the machine immediately when there is an abnormality .

4 . Speed adjuster : the speed adjust button to pull the upper fixture

5 . Upper and lower fixture

6 . Length sensor : it will sensor the resistant strength when the lower panel goes upward , and will output the strength to the display screen .

6 . Specification table ( tab . 1 )