Xenon Arc Aging Test Chamber

Xenon Arc Aging Test Chamber
Xenon Arc Aging Test Chamber
prev
  • Xenon Arc Aging Test Chamber
  • Xenon Arc Aging Test Chamber
  • Xenon Arc Aging Test Chamber
  • Xenon Arc Aging Test Chamber
next
  • Xenon Arc Aging Test Chamber
  • Minimum: 1 SET
  • Delivery: 15 days after order.
  • Model: HD-E711-1
  • Country: China
  • BrandName: HD
  • Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
  • Payment: L/C, D/P, T/T
  • Price: FOB, CIF
  • Inquire Online

Product Information

Xenon Arc Aging Test Chamber

The usage

Xenon Arc Aging Test Chamber is to test the product undergone illumination/rain/condensation/temperature/humidity/wind and any other climatic changes. This aging tester mainly for the test of non-ferrous/organic/rubber/plastic and building materials. Xenon lamp aging chamber simulated under different environmental conditions, the material is exposed to changes in sunlight produced for product development and quality control to provide the appropriate environment for simulation and acceleration testIt can provide data for user to evaluate the products' properties and performance in order to improve the product qualities.

Usage:
General temperature and humidity test chamber used more widely, generally used in electronics, semiconductor, pharmaceutical, chemical, cosmetics, paint, oil,color,photo,food and other industries and universities, inspection and quarantine bureau, commodity inspection, drug testing, military academy, Chinese Academy of Sciences and other research mechanism.

The certification

ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, SGS, SMC, CMC, CPA, CE,CMA,IMC


MAIN PARAMETER:

Item

Specification

Internal Dimension (W*D*H)

800*800*800mm

External Dimension (W*D*H)

1450*1500*2000mm

Inner chamber material

SUS 304 # Stainless Steel, Anti-rust, easy to clean



Chamber Temperature

40±3

Temperature Uniformity

3

Blank panel temperature

65±3

Humidity Range

55%-90%

Irradiated intensity

0.35±0.02w/m²at 340nm (within±10%)

Xenon lamp power

6.KW water-cooled xenon lamp x 1pc

Control system

Siemens PLC controller, auto display irradiance

Distance from specimen to arc center

250~300mm, Effective exposure area 6400cm2

Filter

Borosilicate filter inside and outside

Water pressure at nozzle

1 - 1.5 bar

Sample rack

Stainless steel rotary sample rack, 3-7rpm

Door seal

Silicone rubber seal

Temperature sensor

PT100 high precision temperature sensor

Air circulation system

Stainless steel centrifugal rotor vane to improve the uniformity of temperature and humidity

Cooling ventilator

Automatic controlled by temperature controller, and inner chamber cooled by refrigerating system

Cooling ventilator

France Tecumseh compressor

Power

AC380V, 50Hz, three phase

Safety Protection

Over heat protection for fan,

Over load protection for cooling system,

Over pressure protection for cooling system,

Over temperature protection,

Over heat and over flow protection for water pump,

Leakage protection, Water shortage protection,

Auto stop after failure warning


MAIN FEATURE:

1, Ventilation system: Automatic controlled by temperature controller, and inner chamber cooled by refrigerating system

2, Back panel thermometer: adopt wired transmission technology, which highly improve the control accuracy.

3, Temperature sensor: PT100 platinum resistance temperature body.

4, Equip with intelligent temperature and humidity controller, with PID adjustment and rapid self-turning. It can set several parameters to do cyclic test, directly digital temperature display for easy reading.

5, Multiple protective devices: Over temperature protection, water leakage alarm, over pressure of compressor, electricity leakage protection, alarm and auto power offer protection. In order to protect Xenon light, the light will turn off automatically once open the door.


Test methods and parameters as per standard 50451:

Xenon Arc Aging Test Chamber 



Cooling System
Multi-wing strong air circulation blower, to avoid any dead ends, xenon lamp aging chamber allows a uniform distribution of temperature and humidity within the test area.
Air duct return air design cycle of wind, air pressure wind speed are in line with testing standards, and can open the door the moment the temperature and humidity stabilization time soon.
Heating, cooling, humidification system is completely independent can improve efficiency and reduce testing costs, increase life expectancy and lower failure rate

Irradiation Control System:
1. Light source: Full air-cooled solar spectrum long-arc xenon lamp.
2. Fu illumination control: by a xenon lamp radiation intensity and Control instrumentation constitute a control loop closed loop adjustment, xenon lamp radiation intensity, can be flexibly adjusted.
3. Radiation measurements: using optical fiber transmission, to avoid the indoor temperature and humidity changes affect the accuracy of radiation measurements.
4. The ultraviolet radiation sensors: the lamp can be due to aging or any other light energy changes caused by the decline in time to make corrections.
5. tired reminder: the software system increases when irradiated tired features, system power does not affect the result of tired, when radiation reaches a predetermined lamp life can be measured or automatically remind users to replace the lamp.
6. The optical filter system: borosilicate and soda lime glass, according to the test to meet the test requirements, adjust the appropriate type and quantity of the filter sheet; combined with infrared, ultraviolet, and glass windows and other features, the use of special optical glass filters are used mimics the indoor and outdoor solar radiation environment

The images of this machine

Xenon Arc Aging Test Chamber

 If want to know more,click "contact us" 

Customer feedback:



 


FAQ

Why choose us? 

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

2.Excellent After sale Service: 
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.

3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

4.Good Packaging:

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

 

How to Contact Us?

Please Send your inquiry Details in the below for our quotation,Click "Send" Now!


Messages

Message boardmin&max