PRECISION TESTING INSTRUMENT Phone:+86-13602361535 E-mail:manager@qc-test.com
Haida Equiment Manufacturer has more than 15 years experience for test equipment...
Rapid-rate Thermal Cycle Test Chamber
Rapid-rate Thermal Cycle Test Chamber is ideally suited for specimen test requiring quick changes of temperature. It can evaluate the failure of thermal mechanical properties of product. Normally the temperature rate is less than 20C/min, which can achieve the real application environment of testing sample by the fast ramp rate.
Test Standard:
IEC60068-2-14 and etc.
1. Has cable ports are provided on the left side to allow easy wiring of specimens for measurement or voltage application;
2. The door equipped with hinges preventing auto-closing;
3. Can designed to comply with major environmental test standards like IEC, JEDEC, SAE...
4. High performance and quiet operation (80 dBA)
Item | Specification |
Internal dimension(W*D*H) | 400*500*500mm |
External dimension(W*D*H) | 600*1080*1380mm |
Working capacity | 100 liter |
Internal chamber material | SUS#304 stainless steel, mirror finished |
External chamber material | Stainless steel with paint spray |
Temperature range | -70℃~+180℃ |
Temperature fluctuation | ±1C |
Humidity range | 10%~98%RH |
Humidity fluctuation | ±2.5%RH |
Humidity uniformity | 3%RH |
Sample tray | SUS#304 stainless steel, 2pcs |
Observation window | Tempered glass: 250*300mm |
Testing hole | Diameter 50mm, for cable routing |
Power supply source | Three-phase, 380V, 50Hz |
Safety protection device | Protection for leakage Over-temperature Compressor over-voltage and overload Heater short circuit |
The controller adopts LCD touch screen, and it is with automatic, intelligent and humanized design
The chamber was installed with refilling device ,water purification device, circulat
SUS304 mirror stainless steel plate, corrosion-resistant, easy to clean, beautiful
The door is equipped with electric heating (automatic adjustment) design for anti-frosting and anti-condensation.
There is a set of LED lamp in the middle of double-layers viewing window
CONTACT PERSON :Mrs. Zhong
TEL : +86-0769-8905 5588
E-MAIL : manager@qc-test.com
PHONE : +86-13602361535
FACTORY ADD: No.13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province.
Copyright © 2017 Haida International Equipment Co., Ltd. | All Rights Reserved Design by www.allweyes.com Haida Subsite.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
العربية
