This machine suit for lithium battery (or battery pack) flame resistance test. Drill a circular hole with a diameter of 102mm on an experimental platform, place a wire mesh on the round hole, place the battery on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or the battery burns, and the combustion process is timed.

STANDARD FEATURES

Item	Specification
Control method	push button or PLC touch screen
Burner	Bunsen burner, the inner diameter of the nozzle is 9.5mm, and the length is about 100 mm
Flame application time	0 ~ 999.9 seconds ± 0.1 seconds
Test round hole surface diameter	102mm
Test mesh sieve	woven from stainless steel wire with a diameter of 0.43mm (0.017inch) into a US inch mesh screen with 20 grids
Flame height	38mm
Inside dimension	750750500mm
Outside dimension	9009001300mm
Combustion gas	methane or liquefied petroleum gas (customer-owned)
Power supply	1-phase, 220V, 50Hz

Internal chamber material	1.2mm thick stainless steel plate with Teflon; strong corrosion resistance and flame retardant
External chamber material	1.5 mm thick A3 cold plate paint treatment
Observation window	Two-layer vacuum tempered glass observation window with size 250*250mm
Exhaust port	Diameter: 100mm; it start work once when machine operate
Door safety device	Open and power off threshold switch
Test hole	A test hole with a diameter of 50 mm on the left side of the machine

TEST STANDARD

UL 1642:2012; UL 2054:2012; IEC 62281:2004; UN 38.3

Leave a Message

Name

E-mail

Content

Captcha

Loading verification code...

社媒暂无评论