1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated time effect
CHAMBER DESIGN FEATURES
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Direct water supply connection for continuous operation
6. Accurate wet/dry-bulb humidity measurement system for easy maintain
1. PIC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output
20~98%R.H. (Refer Image below)
1℃/min in average (without loading)
3℃/min in average (without loading)
Internal chamber material
SUS#304 stainless steel, mirror finished
External chamber material
Stainless steel with paint spray
Korea TEMI 880 controller
LCD touch screen, programmable control temperature and humidity
Can set different parameter for cyclic test
50mm high density rigid Polyurethane foam
Explosion-proof type SUS#304 stainless steel fins radiator pipe heater
France Tecumseh compressor
PT-100 dry and wet bulb sensor
Diameter 50mm, for cable routing
Safety protection device
Protection for leakage
Compressor overvoltage and overload
Heater short circuit
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
TEST INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 3 years. TEST products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's
not from our factory. What you need to do is to send us the controller.
We will sign a letter of commitment while we sign the contract, which will improve your confidence
4.Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film
before put them into the wooden case, which not only has good shock absorption, impact resistance,
heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency
How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Send" Now!
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist