Item |
Description |
Max. Force |
200 kg (2KN) |
Load cell |
China brand load cell |
Control system |
PC with windows 7 system |
Motor |
AC Motor, high-precision mechanical ball screw rod |
Force reading |
kgf, Ibf, N, KN, T etc |
Stoke |
900mm including fixture |
Load cell Resolution |
1/100,000 |
Load Precision |
within ±0.5% |
Test speed |
20~300mm/min (adjustable) |
Software |
TM 2101 |
Curves display |
Load- elongation, Elongation-time, Time-elongation, Stress-strain |
Data display |
Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc… |
Safety features |
E-Stop Over-load protection Upper and lower limit switches Load sensor with automatic retreat |
1. Power switch: main switch of the
machine
2. Power
indicator light: The power indicator light will be on when power on. It will be
off when power off or electricity is not ok.
3. Emergency
switch: This key can help to stop the machine immediately when there is an
abnormality.
4. Speed adjuster: the speed adjust button to pull the upper fixture
5. Upper and lower fixture
6. Length
sensor: it will sensor the resistant strength when the lower panel goes upward,
and will output the strength to the display screen.
Applications of adhesive peel tester
Adhesive
peel tester is suitable for 90° and 180° peel of adhesives, adhesive tape, stickers, packaging tape, medical
adhesive tape,,,etc.
Copyright © 2017 Haida International Equipment Co., Ltd. | All Rights Reserved Design by www.allweyes.com