cookware Knives Testing Equipment

1) The reciprocating table with fixture to clamp the blade,  

     the movement was driven by ball screw and servo motor.

2) Cutting stroke is settable from 20 to 60 mm.

    (standard requirement is 40 mm)

3) Travel speed is adjustable from 20 to 80 mm per second.

    (Standard requirement is 50  mm/second)

4) 4 digits pre-set counter for test cycles setting.

5) Linear optical scale to detect each cutting depth of each single stroke

    ( forward and backward)

6) The tester use PLC (programmable logic controller) and large touch screen monitor for

    display.

7) The cut depth was automatically recorded and accumulated, Total amount will be    

    displayed after finish the test cycles.