Walk-in Battery Explosion Proof Test Chamber
Product Description:
walk-in environmental test chamber ,as a climatic test chamber that may be configured to almost any large components . this walk in chamber can do Temperature/Humidity Cycling,Constant Temperature/Humidity,Extreme Temp / Humidity Testing, Fast Ramp Rate,Storage Testing,Altitude Testing,Vibration Integration,Solar Simulation etc .
Usage:
walk-in environmental test chamber main for the industry of large parts, semi-finished and finished products of the temperature and humidity testing, such as computer terminals, auto parts. Room temperature and humidity is mainly composed of a control panel, distribution plate, base plate, wet blower, heater, humidifier, refrigerator and.
Meet the standard:
GB10592-89 Technical condition of high and low temperature test chamber
GB10586-89 Technical condition of damping test box
GB2423.1-2001 Test A High temperature test method
GB2423.2-2001 Test B Low temperature test method
Test method for constant hot and humid test of GB2423.3-93 test
GB2423.4-93 Test Db
etc
Product performance & features:
1.Walk-in chamber has a big temperature / humidity range and can meet user’s entire requirement. It adapts to unique balance thermoregulation & humidifying way and can get a safety, precise temperature humidity environment. It has stability, balance heating, humidifying function and also can proceed in high precision, high stability temperature humidity control.
2.Walk-in test room is equipped with high precision intelligentized thermoregulator, temperature and humidity adapt LCD display control 7551 program instrument ( it also can use OYO-5461 according to user requirement), can choose the temperature humidity recode instrument.
3.Walk-in test room can choose computer for remote control according to the function
4.Automatic select the refrigerating circuit, the automatic control instrument can automatic choose operate refrigerating circuit’s function according to the temperature set value, and direct-on line starting refrigerating machine in high temperature condition which can cooling directly.
5.The interior door is equipped with big observation window which convenient for viewing the test status of specimen.
6.Walk-in room is equipped with advanced safety protection device --- residual current device; overheat protector, phase failure protector, water-break protector.
Specification | HD-E705 |
Temperature Range | -50c To +100c |
Humidity Range | 40% To 98% Rh |
Heating up | -55°C ~ +85°C within 50 min |
Heating down | +85°C~ -55°Cwithin 60min |
Dimension (Internal) (w x d x h) | 1500 x 1500 x 3000 Mm |
Dimension (External) (w x d x h) | 2850 x 1700 x 3200 Mm |
Ramp | Variable, Temp. 0~5c / Min & Humidity 0~5%/Min In Average, No Load |
Accuracy | Temp. ±1c, Humidity ±2.5%Rh |
Interior Walls | Stainless Steel 304 |
Exterior Walls | Cold Rolled Stell Plate With Baking Finish |
Temperature & Humidity Measurement And Controller | 32 Bit Control And Monitoring System. Interface Facility With Rs232 Programmable Temp. Humid. Controller |
Viewing Window | Multi Pane Glass Window Size |
Port Holes | 50 Mm Diameter For Wire Routing |
Power Supply Requirement | Three Phase, Ac380 v ± 10 %, 50 Hz |
Sound Pressure Level | <72db (a) |
Condenser Cooling | Water Cooled |
The table parameters is for the company Standard Model parameters, we support customer customization parameters
Copyright © 2017 Haida International Equipment Co., Ltd. | All Rights Reserved Design by www.allweyes.com Haida Subsite
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist