Home  > Haida Products  > Textile Test Equipment  >  Xenon Arc Light Fastness Tester For Textile And Leather
Xenon Arc Light Fastness Tester For Textile And Leather

Xenon Arc Light Fastness Tester For Textile And Leather

15 days after order.
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
L/C, D/P, T/T

Xenon Arc Light Fastness Tester is specifically designed for light colour fastness testing on textiles, leather and other materials after being exposed to the simulated conditions of nature weather (daylight, rain, temperature and humidity, etc.)
The xenon arc test chamber can test a range of standards test methods, including
 ISO105-B02 / B04, AATCC 16, etc.


Our Xenon Arc Light Fastness Tester is designed to meet the requirements of ISO 105 B02/B04 and AATCC Test Method 16 standards. It has a rotating specimen rack and provides precise control of critical test parameters including spectrum, irradiance, relative humidity, chamber temperature and black standard temperature.

To determine the resistance of the color of textiles to fade when exposed to artificial light (xenon arc) which is representative of natural daylight.


Standard: A Standard can be selected from a pre-programmed list or the user can define their own method.


Colorfastness to Light

This test method provides the general principles and procedures which are currently in use for determining the colorfastness to light of textile materials.


Weather Resistance of Textiles: Xenon Lamp Exposure

This test method provides the procedure for the exposure of textile materials of all kinds, including coated fabrics and products made thereof, in an artificial weathering apparatus using controlled conditions of test.

ISO 105-B02 (EN) (DIN)

Textiles-Tests for colour fastness- Part B02: Colour fastness to artificial light: Xenon arc fading lamp test


ISO 105-B04 (EN) (DIN)

Textiles - Tests for Colour Fastness - Part B04. Colour Fastness to Artificial Weathering: Xenon Arc Fading Lamp Test


GB/T 8427

Textiles-Tests for colour fastness-Colour fastness to artifical light:Xenon arc fading lamp test

This standard specifies a method to determine the color fastness of various types of textiles to the artificial light effect equivalent to sunlight (D65). This standard can also be used for white (bleached or fluorescent whitened) textiles.



Xenon lamp ventilation and cooling device: The temperature ventilation and cooling system of chamber  is cooled by Taiwan's high temperature resistant turbine fan, and the cooling system in the box is cooled.

Light box temperature alarm device: The temperature in the light box can be monitored by PT100 high-precision sensor to monitor the over-temperature alarm and cut off the power of the xenon lamp.

The blackboard thermometer adopts wired transmission technology, which effectively improves the control accuracy. (using high temperature resistant isolation shielded communication line)

Optical fiber transmission is used to measure the radiation intensity of the xenon lamp to avoid the problem of measurement error caused by temperature. (Optional accessories)

BPT(black panel thermometer) or BST (black standard thermometer) is installed on the sample holder.

Device: In order to record the working time of each test, the equipment is equipped with a timer on the operation panel, which can control the time of the equipment, and the equipment will automatically shut down after the timing ends.

Protection device: In order to make the xenon arc lamp work normally without damage, the xenon lamp will automatically go out when the door is opened, and the whole machine will stop working.

        Internal Dimension (W*D*H)


External Dimension (W*D*H)


performance indicators

Chamber temperature


Temperature accuracy


Black panel temperature


Chamber humidity range


 Humidity accuracy


Irradiance Range


Irradiance strength


Irradiance accuracy 


Xenon lamp power

2500W air-cooled xenon arc lamp (recommend replacing lamps every 1200 hours)

Rack rotating speed


Test Positions

10 pieces of 145x 45mm, 5 pieces of 145x 75mm

Exposure Area of each Test Position

ISO 65.25cm² (145 x 45) mm

AATCC 108.75cm² (145 x 75) mm

operation control system

water spray system

The water spray time can be set in 999 minutes, and the spray stop time can be set in 999 minutes

Accuracy range

Setting/indication accuracy: temperature 0.1, humidity 1%RH

Temperature and humidity sensor

Platinum resistance.PT100Ω/MV

  Heating system

Fully independent system, nickel-chromium alloy electric heating heater

humidification system

External isolation, all stainless steel shallow surface evaporative humidifier

blackboard temperature

Bimetal Blackboard Thermometer

circulatory system

Temperature-resistant and low-noise air-conditioning motor. Multi-blade centrifugal fan


Internal chamber material

High-quality carbon steel plate, phosphating electrostatic spray treatment / stainless steel matte line hairline treatment

External chamber material

SUS 304 # Stainless Steel, anti-rust

Sample holder material

SUS 304 # Stainless Steel, anti-rust

Standard accessories

radiation-proof glass windows-1 set, Xenon lamp-1 PC

safety protection

Leakage, short circuit, over temperature, water shortage, motor overheating, overcurrent protection

Power supply

AC380V±1050±0.5Hz, 13W

Xenon, Air-Cooled Lamp

The lamp is very easy to fit and replace for users.

With High performance, long lasting, air-cooled xenon lamp.

Specimen holders

All stainless steel material, easy to install and remove, can meet various test standard


The user interface is clear and easy to navigate, and starting the testing easy and efficient. 

Leave a Message


Loading verification code...

Please complete verification first

Chat Online
Chat Online
Leave Your Message inputting...