Home  > Haida Products  > Environmental Test Chamber  > Climatic Test Chambers  >  Temperature Humidity Chamber Programmable
Haida Equiment Manufacturer

Haida Equiment Manufacturer has more than 15 years experience for test equipment...

Temperature Humidity Chamber Programmable

Temperature Humidity Chamber Programmable

15 days after order.
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
L/C, D/P, T/T

Temperature Humidity Chamber Programmable

Temperature humidity chamber also as climate chamber is a efficient and accurate simulation temperature and humidity environment test chamber. There is a the latest programmable controller.programmable control temperature and humidity date ,and it can set different parameter accurate for cyclic test.LCD touch screen type operation interface is easy to operate.

humidity rangeModel-- HD-E702-800

  1. Internal dimension (W*D*H)-- 1000*800*1000mm

  2. External dimension (W*D*H)-- 1500*1180*1900mm

  3. Temperature range-- -40~+150℃

  4. Humidity range-- 20~98%RH (Refer Image )

  5. Controller-- LCD touch screen, programmable control temperature and humidity


1. To simulate test environment with different temperature and humidity

2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…

3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation

4. Uncover test unit weakness in a short-term test with accelerated time effect

Meet Test standard(including but not limited to... ):
Compliance with specifications GB, GJB, MIL, ASTM, CNS, IEC, JIS, AATCC, DIN, Fed Test, BS and SAE.

temperature humidity inner

Application Industry:

1. Electronic products: mobile phones, computers, television, video recorders and so on
2. Textile fabric products: clothes, hats, shoes, ropes
3. Wire and cable: data cable, usb,
4. Leather products: handbags, wallets, leather shoes, leather chairs
5. Instrumentation, vehicles, plastic products, metal,
6. Food, chemical, building materials, medical, aerospace
7. Others...

tem hum

Standard Features:

  1. Internal dimension (W*D*H)-- 1000*800*1000mm

  2. External dimension (W*D*H)-- 1500*1180*1900mm

  3. Temperature range-- -40~+150℃

  4. Temperature fluctuation-- ±0.5℃

  5. Temperature uniformity-- 2℃

  6. Humidity range-- 20~98%RH (Refer Image below)

  7. Humidity fluctuation-- ±2.5%RH

  8. Humidity uniformity-- 3%RH

  9. Cooling speed-- 1℃/min in average (without loading)

  10. Heating speed-- 3℃/min in average (without loading)

  11. Internal chamber material-- SUS#304 stainless steel, mirror finished

  12. External chamber material-- Stainless steel

  13. Cooling method-- Air cooling

  14. Controller-- LCD touch screen, programmable control temperature and humidity

  15. Can set different parameter for cyclic test

  16. Lighting-- Heat resistance

  17. Observation window-- Tempered glass

  18. Testing hole-- Diameter 50mm, for cable routing

Safety Protection Device

  1. Protection for leakage

  2. Over-temperature

  3. Compressor overvoltage and overload

  4. Heater short circuit

  5. Water shortage

Chamber Design Features:

1. High performance and quiet operation (68 dBA)

2. Space-saving designed for flush installation to wall

3. Full thermal break around doorframe

4. One 50mm diameter cable port o left, with flexible silicone plug

5. Accurate wet/dry-bulb humidity measurement system for easy maintain


Programmable Controller:

1. PLC controller for test chamber

2. Step types include: ramp, soak, jump, auto-start, and end

3. RS-232 interface to connect computer for output

Our Services

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

1. Pre-service

   --24 Hours online service for your consult.

   --Help choose right model,and a series of service,person,advise.

2. Middle service

    --Give you best offer

    --Provide discount for many sets order

    --Do customer's request:

    --Choose payment term you convienent.

    --Promptly production and delivery,inform you in time.

    --Can provide invoice value as you like to decrease your tax.    

3. After sale service :

   --1 year warranty service and all life maintenance.

   --Technical Egineer are avalible for oversea trainning.

   --Free change for some parts

   --Remote control technical consult

   --Free installation DVD

   --Maintenance plan


   We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

5,Good Packaging:  

  Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

Leave a Message


Loading verification code...

Please complete verification first

Chat Online
Chat Online
Leave Your Message inputting...