Industry News
Home  > News  > Industry News  > 

Auto Parts Testing

Auto Parts Testing


auto parts test chamber

Auto parts test purpose:

The automobile is an electromechanical hybrid complex system consisting of tens of thousands of parts. Auto parts testing can help automakers and component manufacturers to quickly improve the performance of components and meet your high requirements for product quality and safety.

Auto parts test level:

1, material level test: test the material of the production parts, such as material strength, VOC, toxicity test, etc. (environmental test).

2, part level test: test the part itself, such as structural strength, part function, etc.

3, assembly level test: test the matching performance of the parts after installation to the vehicle, such as NVH, bad road, exposure, impact test, etc.

Auto parts testing standards:

Automotive exterior parts testing:

The pros and cons of the appearance of the exterior parts are the first impression of the vehicle, and it is also responsible for resisting the impact of the environment on the body. Therefore, in addition to the aesthetic requirements,Haida can test the important aspects of the exterior parts in terms of strength, toughness, environmental resistance and impact resistance.

Applicable Products

Test items

Car front and rear bumpers

Mechanical properties

Car body skirt

Coating / coating thickness


Wear resistant

Outer circumference

Chemical resistance


High and low temperature aging

Side anti-collision strip

UV / xenon light aging

Door and window seal

Dustproof and rainproof


Automotive interior parts testing Compared to the exterior parts, the aesthetics and the protection of the body, the interior parts as a direct carrier for the superior ride experience, need to have excellent performance in terms of hand, comfort and visual experience.

Applicable ProductsTest items

Instrument panel / dashboard

Restriction of heavy metal components

Door inner panel

VOC analysis


Flame retardant test

steering wheel

Burning smoke dust test

Ceiling / inner circumference

High and low temperature cycle test

Hood / carpet

High and low temperature impact test

Sun visor

UV / xenon lamp aging

Door handle

Mechanical shock, stretch and compression

Threshold trim

Rain test

air conditioner outlet

Dust test

Heater / air conditioner

High and low temperature aging

Haida Coating Thickness Testing equipment that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge can be used painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.                              

Coating thickness gauge is an essential quality assurance tool when anodizing, galvanizing and applying zinc coating to metallic surfaces. A coating thickness gauge also is used to measure body paint thickness and uniformity on pre-owned cars, revealing repainted spots, identifying hidden damages and exposing undisclosed accidents. This information is important when determining the actual value of a used car.

Accelerated aging is testing that uses aggravated conditions of heat, temperature and humidity,uv, oxygen, xenon,sunlight, vibration, etc. to speed up the normal aging processes of items. It is used to help determine the long-term effects of expected levels of stress within a shorter time, usually in a laboratory by controlled standard test methods. It is used to estimate the useful lifespan of a product or its shelf life when actual lifespan data is unavailable. This occurs with products that have not existed long enough to have gone through their useful lifespan: for example, a new type of car engine or a new polymer for replacement joints.

Also, the device or material under test can be exposed to rapid (but controlled) changes in temperature, humidity, pressure, strain, etc. For example, cycles of heat and cold can simulate the effect of day and night for a few hours or minutes.

Environmental test chamber artificially replicates conditions which machinery, materials, devices or components might be exposed to. It is also used to accelerate the effects of exposure to the environment, sometimes at conditions not actually expected.

Chamber testing involves testing and exposing products to various environmental conditions in a controlled setting. Climatic Chamber testing and Thermal Shock testing are part of chamber testing. Climatic Chamber testing is a broad term used to describe different ways of simulating climate or excessive ambient conditions exposure for a product or a material under laboratory controlled yet accelerated conditions. On the other hand, Thermal Shock testing is used to simulate how materials will react when exposed to changes in extreme climatic conditions, such as going from extremely cold to extremely hot conditions in a very short period of time (usually only few seconds).


The test instruments that can be used in a variety of environments that may  include:

1. Constant temperature and humidity test chamber

2. Thermal shock test chamber, Rapid-rate thermal cycle chamber, High Low temperature cycle chamber

3. Altitude test chamber

4. Vibrations test system with temperature & humidity chamber

5. salt spray corrosion resistance chamber

6. IP1-9 Rain/water spray test chamber

7. UV weathering test chamber

8. Xenon weathering test chamber

9. Ozone aging test chamber

10. Dust corrosion test chamber

11. Formaldehyde test chamber

Haida International Equipment, a professional manufacturer of environmental test chambers in China,has over 13 years experiences in designing and providing auto parts testing equipment,not only can offer you test machine,but can help you plan lab testing solutions.If you have any questions,you can contact us now.

Chat Online
Chat Online
Leave Your Message inputting...