Foam Compression Recover Time Tester
Applications & test purpose:
Foam Compression Recover Time Tester is used to determine the recovery time of the slow recovery (viscoelastic) foams. ASTM D3574 is a commonly used standard for tests involving flexible cellular foam materials. Test M specifies a method for measuring the recovery time of slow recovery (viscoelastic) foams, like memory foam. It is an important test in the mattress industry.
Standard Features:
Control and display | PLC+LCD |
Sensor | Load cell |
Capacity | 200KG |
Unit | N |
Up plate | Diameter 200mm, bottom fillet R1mm |
Low plate | 400×400mm, holes diameter 6mm, space 20mm |
Test Sample Size | 380*380*100mm |
Test speed | 1000 + 100 mm/min |
Motor | Servo motor |
Driver | Electric actuator |
Power | Single phase, 220V, 50Hz |
Weight | 160KG |
Foam Compression Recover Time Test Procedures:
Prepare and condition the test specimen according to the geometries and guidance described in the test standard for IFD testing.
Place the specimen onto the perforated base compression platen. Lower the circular top platen onto the top of the specimen to apply a small preload and identify specimen thickness.
Indent the specimen to 75% of its original thickness at the speed referenced in the test standard.
After a specified dwell time, remove the circular top platen quickly to the specified deflection (close to original height), and record how much time it takes for foam to contact the top platen.
Foam Compression Recover Time Tester Meet Design Standard :
ASTM D 3574-2008
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2. Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3. Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4. Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Copyright © 2017 Haida International Equipment Co., Ltd. | All Rights Reserved Design by www.allweyes.com Haida Subsite
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist