APPLICATIONS & TEST PURPOSE:
This machine is suitable for comprehensive mechanical testing of strong spring mattresses, ordinary spring mattresses, foam mattresses, and brown fiber elastic mattresses. A machine designed to simulate the constant rolling during human sleep. A rolling loading module is placed horizontally on the specified loading position of the mattress, rolling at a certain frequency, and reciprocating loading the mattress to test the long-term repetitive rolling load of the mattress. 's ability to bear. At the same time, it is equipped with tests including height measurement, soft hardness and rolling fatigue; it meets the requirements of national GB, EN, ASTM and other test standards.
STANDARD FAETURES:
Capacity | 0.5kN Load Sensor * 1; 2kN Load Sensor * 1; |
Servo motor | 0.4kW*2; 1.5kW*1 |
Electric cylinder stroke | Stroke: 500mm; maximum thrust force:39kN |
Control Model | Circuit board and software are independently developed, closed loop control |
Display Model | PC controller; windows mode operation |
Test Speed | 10～20 cycle/min（EN 16±2次/min，ASTM 20次/min MAX） |
Rolling Stroke | EN-Roll left and right from center 250mm | ASTM-the total rolling distance from the center is mattress 70%, no more than 965mm |
Rolling Drive | Servo motor with synchronous belt drive |
Thickness and loss test | Displacement accuracy:±0.1mm, loading speed : 50～250mm/min, Force Loading Accuracy:±0.1N(0.1～480N) |
Hardness testing accuracy | displacement accuracy:±0.1mm，Loading Speed: 50～250mm/min, Force Loading Accuracy:±0.1N(0.1～1300N) |
Up and down modules | Cylinder driving |
Loading Weight of Roller | Round Wooden Roller （1400±7）N | Hexagonal Wooden Roller （109±4）kg |
Rolling Durability Test | Round Wooden Roller: 30000 cycles | Hexagonal Wooden Roller : 100000 cycles |
Data Output | Windows mode output; Office mode output |
Max.Sample Size | 2200x2000x400mm(L*W*H) |
Power Supplier | 1∮ AC 220V 50Hz |
Machine Power | About 3kW |
Air pressure | ≥6kg/cm² |
Machine Size | 2660mm×2460mm×1880mm（L*W*H） |
Weight | About 1.6T |
CONFIGURATION:
Standard Spare Parts | Files | English Operation Manual*1 piece |
Power line | Equipped with your local power line |
|
|
PC | Desk type*1 Set |
Air tube | Φ8Air tube*1 |
Air cylinders | SE63×400mm*1 |
Electric actuator | GG60*2 |
Loading platen for firmness testing | （EN）Φ355 R20 curvature 800 loading platen *1 |
Height & Loss Loading Platen | （EN）Φ100 R10 H25 loading platen*1 piece |
Roller | （EN）Round Wooden Roller *1 piece |
Clamps | Clamps for fixing sample *2 Sets |
Optional | Rollers | Hexagonal Wooden Roller（ASTM）*1 |
Loading Platen | （ASTM）Φ344 H12*1 |
Power Line | Per your local country requirement |
Air compressor | ≥3P*1 Piece |
(1)Hardware features
1. The tester adopts a combination of thickened aluminum profile frame and steel, which is generous and stable as a whole; the base adopts a split design, which is more convenient for transportation and movement;
2. The fixture adopts movable installation, and the whole machine adopts open design, which is convenient for installation, debugging and machine transportation;
3. Using the brand cylinder, the thrust is stable; the cylinder drives the lifting structure, which is stable and reliable, and has a long service life;
4. The whole machine adopts modular design, which is convenient for combination and quick replacement; it meets more test standards;
5. High-quality imported materials are used for key moving parts to ensure durability and stability.
(2) Features of the software
1. The control system adopts computer software, with powerful functional interface, intuitive algorithm data, and convenient operation;
2. Driven by Panasonic servo motor, the displacement, speed and thrust are precisely controlled, stable and reliable;
3. The machine can export the test data through the USB terminal, and can customize the test parameters, and the machine will automatically stop when the test is completed;
4. The software has fault alarm prompt, power-off memory function, and real-time monitoring function; it can basically realize unattended test, and the test will be automatically stopped after the test is completed, and the test results will be automatically retained at the same time;
5. The software is equipped with in-position detection, limit protection, overload protection and other designs to ensure safer operation.
العربية
