Home  > Haida Products  > Environmental Test Chamber  > Aging Test Chambers  >  Ozone Aging Chamber
Haida Equiment Manufacturer

Haida Equiment Manufacturer has more than 15 years experience for test equipment...

Ozone Aging Chamber

Ozone Aging Chamber

15 days after order.
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
L/C, D/P, T/T

Ozone Aging Chamber 

ozone aging chamber video                        ozone aging test chamber pdf

1.Product introduction

Ozone Aging Chamber can accurately simulate and control temperature, humidity, ozone concentration of different tools to help you carry out multiple static and dynamic testing

Ozone Aging Chamber can simulate natural environment of ozone atmosphere for rubber aging, adopt effective anti-aging measures to enhance the life of rubber products.

Ozone has important effects on the aging of materials. Ozone attacks the carbon-carbon double bond of synthetic rubber and creates cracks on its surface. Rubber parts such as insulated cables, seals and tires are thus destroyed, thereby shortening their service life. Using this ozone test system, you can achieve accelerated aging of any rubber product to determine the resistance level of the material's ozone aging.

2.Ozone Aging chamber dynamic test:
Open the turntable button and the extension button, according to the need to adjust the speed, exhaust button is the end of the test when the ozone discharge to open the outdoor

3.Ozone system
As a result of IF high voltage power supply, because the electrode does not produce corona overheating, so that the stability of the ozone concentration will not work with time or gas flow caused by the level of ozone concentration decreased. The high-frequency along the surface discharge ceramic corona generator due to the use of high-frequency voltage discharge, the temperature in the discharge area can not effectively shed, leading to decomposition of ozone due to overheating in high air conditions for the use of appropriate

4.Corresponding standard

JIS K 6259 , ASTM1149 , ASTM1171,   ISO1431,  DIN53509 , GB/T13642, GB/T 7762-2003

 GB 2951

5.Applicable industries

Ozone aging chamber is widely used to control products quality in measuring quality control; Rubber & Plastics; automobile production; wire and cable; packing materials; instruments and meters; medical equipment; civilian nuclear energy; civil aviation; colleges and universities; research laboratories; inspection arbitration, and technical supervision departments and other rubber products.

6.Technical parameter: 



Internal dimension (WxDxH)    


External dimension (WxDxH)    


Temperature range    

RT+10~ 60℃ (suggest to use 40℃±2)    

Temperature Fluctuation    


Humidity range    


Humidity fluctuation    


Ozone concentration    

50~1000 pphm, adjustable    

Ozone concentration deviation    


Sample holder    

SUS#304 stainless steel    

Temperature controller    

Programmable touch screen controller    

Ozone concentration analysis    

Concentration analysis meter    

Ozone generator    

High pressure silence discharge type    

Protection system    

Leakage, short circuit, over temperature, over heat    

Test criteria    

ASTM D1149, ISO 1431, JIS K6259...    


7. Ozone Chamber Structure And Features

1, Internal material adopts high quality mirror stainless steel for ozone resistance.

2, Insulation material: high-density glass fiber

3, Use long axial fan motor and high and low temperature resistant aluminum alloy wing type wind turbines to force vertical air circulation.

4, Chamber door adopts double layer high and low temperature resistant silicone seal ensure the airtight test area.

5, Chamber bottom has high quality caster for convenient move.

6, Observation window uses multilayer hollow tempered glass.

7, Exhaust system: exhaust the high concentration ozone from the test chamber to avoid to poison.

8, Optional: Built-in 360 degree rotation sample holder, including 3 sets static tensile fixture and 3 sets dynamic tensile fixture.


8. Ozone Test Control System

1, With imported micro-computer LCD controller to control the temperature.

2, PID control

3, With auto calculation function to reduce the setting inconvenience.

4, Heater: fin type radiator pipe nickel-chromium alloy u-shaped heater, auto calculate with high accuracy PID + SSR control

5, Temperature measurement: SUS#304, PT 100


Standard Configuration

1, Power line x 1pc

2, Sample holder x 1set

3, Fuse x 1set

4, Operation manual x 1set


If you face any problems in future during Ozone material aging testing chamber  testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation manual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer;

Leave a Message


Loading verification code...

Please complete verification first

Chat Online
Chat Online
Leave Your Message inputting...