Hair dryer line tail bending test machine
Application :
Hair dryer line tail bending test machine is suitable for testing wire in the maximum angle allowed in the resistance to bending and breaking rate , can be connected to a load test . dryer line tailbending testing machine testing principle :
The sample is fixed on the fixture , test fixture swing around , after a certain number after , examine the breakage rate ; or to no electricity , the total number of twists . dryer line tail bending test machine using standard :
EN 60335-2-23Cluase25 UL859Cluase42&44 , GB/T , 4706 , UL817 , provides flexible component and the power standard IEC-60884 VDE , CCC , IEC the cord general safety requirements .
Parameters :
1 , the bending angle of 90~180 degrees :
2 , position : 3 groups of
3 , speed : 6~60r/min
Performance : 4 , automatic detection of disconnect or poor contact and automatic shutdown , and display the corresponding channel test failed
5 , the 6 bit presettable counter and power-off memory function
6 , 6 load socket
Copyright © 2017 Haida International Equipment Co., Ltd. | All Rights Reserved Design by www.allweyes.com Haida Subsite.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist