Home  > Haida Products  > Environmental Test Chamber  > Climatic Test Chambers  >  Large Capacity Hot Air Drying Testing Chamber
Haida Equiment Manufacturer

Haida Equiment Manufacturer has more than 15 years experience for test equipment...

Large Capacity Hot Air Drying Testing Chamber

Large Capacity Hot Air Drying Testing Chamber

Minimum
1 SET
Delivery
15 days after order.
Model
HD-708-1
Country
China
BrandName
HD
Package
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Payment
L/C, D/P, T/T
Price
FOB, CIF

Large Capacity Hot Air Drying Testing Chamber

 

Application:

Large Capacity Hot Air Drying Testing Chamber is suitable for electronic, petroleum, mining, medicine, machinery manufacturing, etc. Products of drum wind drying and heat treatment. Large Capacity Hot Air Drying Testing Chamber is safe, energy saving, thermal insulation performance is good, the drying oven temperature uniformity is good, simple installation, convenient maintenance, etc.

 

Specifications

Large Capacity Hot Air Drying Testing Chamber

1. Stainless steel material
2. High temperature
3. High precision
4. ISO, SGS, CE

 

Large Capacity Hot Air Drying Testing Chamber Structure:

 

1.1 Large Capacity Hot Air Drying Testing Chamber adopts monolithic, thermal insulation layer is made of high quality mineral wool, shell, hot air circulation device, electric control cabinet on the right side of the oven is convenient for operation, drying cabinet equipped with new air in and out of port, the cabinet ventilation duct and hot air circulation fan, drying the casing.

 

1.2 Case material: body skeleton adopts  40 x 40 mm Angle steel welded together, enclosure wall material is 0.8 mm thick stainless steel plate; Wind layer is made of thick 1 (SPCC) cold rolling steel plate, the outer wall material is 1 mm cold rolled high carbon steel, body surface coating light gray paint.

 

1.3 Thermal insulation material: high quality mineral wool, the thickness of the insulation layer design requirements to ensure that the oven in the rated operating temperature range, casing outer wall temperature at room temperature + 25 °C or less; > 100 mm insulation layer thickness of insulating layer at the bottom of the oven about 80 mm.

 

1.4 Door sealing strip:High temperature resistant asbestos rope seal

 

1.5 The door is:Design to open the door and the door is manual flat open, the door is steel structure steel and precision of high qualified steel plate assembly welding and into.

 

1.6 The door is sealed:USES the manual of the rod handle and the door is the soft edge sealing device, pressure can make the door and enclosure, make sure remain the state of closed box in the process of production, to eliminate the hot gases to escape, improved working environment, guarantee the box temperature uniformity and enhance energy saving effect.

 

1.7 The wind but I:Wind but made of 0.8 mm thick stainless steel plate surface blunt D13 holes, is used to control the air flow, to improve the drying oven temperature uniformity.

 

 

Product Main specifications:

 

Equipment model 

 HD - 708

 Large Capacity Hot Air Drying Testing Chamber

Drying oven work size 

Deep 960 (L) x width1760 (W) x 1420 mm (H)

Drying oven outside diameter size

 

Deep 1200 (L) x width 2200(W) x 1860 mm (H)

 

The rated power 

Three phase four wire, 380 v, 50 hz 

The highest working temperature 

300°C 

Using the temperature 

Room temperature + 10 ~ 300 °C can be arbitrarily set 

Heating zones 

1 zone

Heating element connection 

Heating power

24 kw 

The temperature control mode 

Using digital intelligent microcomputer PLD temperature control system. 

Temperature control precision 

±1°C 

Outer furnace wall temperature 

Temperature 35 °C or less 

Drying oven door way 

 Manually turn 

Hot air circulation fan 

370 w x 1 

 

Leave a Message

Captcha

Loading verification code...

Please complete verification first

社媒暂无评论
Chat Online
Chat Online
Leave Your Message inputting...