Two Zone Thermal Shock Chamber
Two zone thermal shock chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.
1. Perfect appearance and easy to operate.
2. Imported LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.
3. Two chamber structures, high temperature chamber and low temperature chamber, control automatically, stay and switch time adjustable.
4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…
5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.
6. Cold and hot shock temperature recover within1 minute, which complies with MTL, IEC, JIS, GJB and other international standards.
Pneumatic operated doorswitch, two chambers
Basket internal dimension
External chamber dimension
High temperature range
Room temperature ～+175℃
Low temperature range
Room temperature ～-50℃
Maximum 1000 cycles, 30 minutes for each one
Do defrost in every 20 cycles
Lifting switch time
Test hole for cable routing
Diameter 50mm on the left of chamber attach a silicone plug
External chamber material
High quality electrolytic steel plate spray with powder, antirust
SUS#304 stainless steel
Thermal insulation material
High quality superfine glass fiber
R404A / R23
Three phase, 380V, 50Hz
High temperature chamber:
1, Including three parts: heater, draught fan and air duct valve
2, Draught fan cyclically stirs hot air through heater
3, The basket with testing product drive to high temperature range when doing high temperature impact test.
Low temperature chamber:
1, Including four parts: evaporator, energy storage piece, draught fan and air duct valve
2, Draught fan cyclically stirs cold air through evaporator and energy storage piece.
3, The basket with testing product drive to low temperature range when doing low temperature impact test.
Pneumatic cylinder: drive basket with testing product to high and low temperature chamber
Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)
Cooling system: complex overlapping efficient cryogenic loop system
Compressor: Bock compressor
Refrigerant: environmental protection refrigerant R23/R404A
Condensation: Stainless steel welded plate heat exchanger
Operate interface: 6" color PLC controller, touch screen
Program memory capacity: 100 groups (modify by operator)
Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 9999cycles
Resolution: temperature: 0.01 ℃
Input: T thermocouple
Control method: PID auto calculation control
Timer, over temperature and power failure protection, alarm, record test curve, emergency stop, display test time
Standard configuration: indication lamp of test chamber, time meter, test hole for wire routing, 6pcs castor, 4pcs adjust wheel.
Power overload protection
Control circuit overload protection
Compressor overload protection
Over temperature protection
Audible and visual alarm
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist