Battery Crush & Nail Penetration Test Chamber is used to simulate the battery penetration test of a sharp object during packaging, transportation, storage, use and disposal.
Test requirements: UL 1642, GB/T 31241-2014, MT/T 1051-2007
Battery Impact Test Chamber
Battery Crush & Nail Penetration Test Chamber is used to simulate the battery penetration test of a sharp object during packaging, transportation, storage, use and disposal.
Test requirements: UL 1642, GB/T 31241-2014, MT/T 1051-2007
Model | HD-H212 |
1. Drive mode | Servo motor drive; |
2. Control method | PLC touch screen control; |
3. Force range | 1~20kN; |
4. Extrusion stroke | 250mm; |
5. Force value display | touch screen display; |
6. Extrusion head | Extrusion head area ≥20cm²; |
7. Extrusion degree | Extrusion pressure reaches 13±0.2kN, keep for 1min; |
8. Test space | 200x200x200mm (width x depth x height) |
9. External material | A3 steel plate and painted, thickness 1.5mm; |
10. Material of inner box | SUS#304, thickness 1.2mm; |
11. Steel needle | φ2mm~φ8mm high temperature resistant steel needle, the length is 100mm (can be specified); |
12. Inner box size | 520x450x560mm (width x depth x height); |
13. Dimensions | 800x700x1720mm (width x depth x height, including door lock); |
14. Pressure relief door size | 200x200mm; |
15. Smoke exhaust pipe | diameter φ100mm, located at the back of the box; |
Structure
Copyright © 2017 Haida International Equipment Co., Ltd. | All Rights Reserved
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist