5000kg Capacity Tensile Testing Machine
Product Description Of Computer Servo Tensile Test Machine
5000kg Capacity Tensile Testing Machine is used in rubber, plastics, wire and cable, textiles, waterproof material, non-woven fabrics and other non-metallic materials and metal wire, metal foil, sheet metal and metal mechanical properties test, with special fixture is also suitable for all kinds of finished products tensile, compression, peel, cut, tear, bend test。
5000kg Capacity Tensile Testing Machine is a kind of electric tensile tester which uses the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically.
Product Features Of Computer Servo Tensile Test Machine
1. Motor system: Panasonic servo motor +Servo driver +High precise ball screw (Taiwan)
2. Control system: a, computer control with TM2101software;b, Back to origin automatically after the test, c, store data automatically or by manual operation
3. Data transmission: RS232
4. Displacement resolution: 0.001mm
5. Graph scale automatic optimization can make graph to display with best measurement and can implement graphics dynamic switching in the test and has force-elongation, force- time, elongation -time, stress - strain.
6. It can save results automatically after test finished, and it is manual filing. It can display maximum force, yield strength, compressive strength, tensile strength, elongation, peel interval maximum, minimum and average, etc.
7. User can set parameters of product materialsuch as length, width, thickness, radius, area and so on.
8. Many languages random switching: Simplified Chinese, Traditional Chinese, and English.
Main Technical Parameter Of Computer Servo Tensile Test Machine
Celtron load cell
G, KG, N, LB
1000mm (including fixture)
0.1-300mm/min (adjustable )
Panasonic Servo Motor
High Precise Ball Screw
One set tensile clamp,one set Lenovo computer, one piece English software CD, one piece operation video CD, one piece English user manual
1, cleared automatically: The device receiving the command, the measurement system will be automatically cleared;
2, automatic parking: automatic identification of the most vigorous test, after the automatic parking break;
3, save memory: test data and experimental conditions can be automatically saved, once, twice or more times so as not to lose;
4, the testing process: test and measurement process, display, and analysis completed by the CNC Microsoft;
5, display: data can be displayed most strongly;
6, reproducibility of results: The test results can be any access;
7, limit protection: a programmable mechanical and two levels of protection;
8, overload protection: When the load exceeds the rated automatically shut down;
9. Emergency stop: with emergency stop switch for emergency power off the machine;
10, and the host computer can be upgraded to achieve independent operation;
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.