Home  > Haida Products  > Rubber and Plastic Test Equipment  >  Environment UV test machine
Haida Equiment Manufacturer

Haida Equiment Manufacturer has more than 15 years experience for test equipment...

Environment UV test machine

Environment UV test machine

Minimum
1 SET
Delivery
15 days after order.
Country
China
BrandName
HD
Package
Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Payment
L/C, D/P, T/T
Price
FOB, CIF

Environment UV test machine


Product description

Environment UV test machine which as a kind of environment test chamber can simulate natural climate in UV, rain, high temperature, high humidity, condensation, darkness and other environmental conditions, by reproducing these conditions, combined into a loop, and let it complete cycles automatically.

  

Technical parameters:

Studio Size

400W×1140D×390Hmm

Outside dimension

500W×1300D×1360Hmm

Materials

Inside and Outside SUS#304 stainless steel 

Temperature range

RT+10~70°C

Temperature uniformity

±2°C

Temperature fluctuation

±0.5°C

Temperature control

PID SSR control

Humidity range:

 ≥90%RH

Controller

Korean TEMI 880 programmable controller

Control mode

Balance temperature humidity control (BTHC)

Test cycle setting

Illumination, condensation and water spray test cycle is programmable

Lamp power

40W/Piece

Distance from sample to lamp

50±2mm (adjustable) 

Centre distance between the lamp

70mm 

Irradiance

1.0W/cm2

Wavelength ultraviolet light

UV-A: 315-400nm;  UV-B: 280-315nm (8pcs, 1600h lifetime)

Effective irradiation areas

640×1140mm

Irradiation black panel temperature

50°C~70°C

Standard Specimen Size

75×150mm or 75×3000mm  (special specitications to be described in the contact)

Required water depth for water channel

25mm, automatically control

Testing time

0~999H, adjustable

Power

220V/50Hz /±10% 5KW

Protection system

Overload short circuit protection, over temperature protection, water lackin


3. Chamber Structure:

1. Shell are made of high-quality stainless steel liner, the sample frame for the aluminum alloy frame-type base plate and extension spring composition;
2. The main controller for the intelligent digital control device, user-friendly design methods of operation, easy to learn and use;
3. Input using digital correction system, built-in commonly used thermocouple, accurate and stable measurement;
4-bit adjustment and AI artificial intelligence adjustment function, a variety of alarm mode


Test Specimen Mounting:


The standard test specimen holder accommodates 2 panels 75×150mm. The test panels are actual the side wall of the chamber. To properly seal the chamber, it is important to have every panel holder filled with specimens or blank panels and to have panel holders in place.


Design criteria:


 (1) ASTM D4587: Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

(2) ASTM D4799: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

(3) ISO 4892-1: Plastics – Methods of Exposure to Laboratory Light Sources – Part 1: General guidance

(4) ISO 4892-3: Plastics - Methods of Exposure to Laboratory Light Sources - Part 3: Fluorescent UV Lamps

(5) ASTM D4329: Standard Practice for Fluorescent UV Exposure of Plastics

(6) AATCC TM186: Weather Resistance: UV Light and Moisture Exposure

(7) ASTM D5208: Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

(8) IEC 61345: UV Test for Photovaltalic (PV) Modules


Poduct image:



 



Packaging & Shipping

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.  

-02.jpg   

Company Information

The introduction of Haida  

Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.  

.jpg1.jpg  


 

-05.jpg  


-04.jpg
 


 


Our Services

Our Services  


 

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.  

1. Pre-service  

    24 Hours online service for your consult.  

    Help choose right model,and a series  of service,person,advise.    

2. Middle service  

    --Give you best offer  

    --Provide discount for many sets order  

    --Do customer's request:  

    --Choose payment term you convienent.  

    --Promptly production and delivery,inform you in time.  

    --Can provide invoice value as you like to decrease your tax.     

3After sale service   

   --1 year warranty service and all life maintenance.  

   --Technical Egineer are avalible for oversea trainning.  

   --Free change for some parts  

   --Remote control technical consult  

   --Free installation DVD  

   --Maintenance plan  

4,Commitment:  

We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.  

5,Good Packaging:    

Good Packaging:  Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.  

 1.jpg  

   

FAQ

Why choose us?   

1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.  

2.Excellent After sale Service: 
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
 

3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
 

4.Good Packaging:  

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.  

   

How to Contact Us?  

Please Send your inquiry Details in the below for our quotation,Click "Send" Now!  


Leave a Message

Captcha

Loading verification code...

Please complete verification first

社媒暂无评论
Chat Online
Chat Online
Leave Your Message inputting...