Cyclic Corrosion Testing Machine
Cyclic Corrosion Testing Machine is used for imitating natural status in increase imitation test. The imitating condition is harder than status that we usually meet. The tester can combine the follow status such as: salt smog, dry, humidity,normal temperature, low temperature.The tester is for product used in intense changeable environment, such as: parts of automobile, navigation equipment, camera equipment, building material, electroplate coating and resistant to metal electrolytic corrosion in electrical system. High precision P.I.D.temperature control meter with its error ±0.1°C.
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.
Internal Size (W*D*H)
External Size (W*D*H)
P.V.C rigid plastic plate, thickness 8mm
Diameter 10mm glass fiber rod, anti-rust
V-shape plastic steel to make sure sample in 15~30 degree inclined
Room temperature ~ 55℃
Continuous and Periodic spray type
Test Chamber Temperature
Salt Spray Method (NSS ACSS)35±1℃
Corrosion-resistant Testing Method (CASS) 50±1℃
Saturated air Barrel Temperature
Salt Spray Method (NSS ACSS)47±1℃
Corrosion-resistant Testing Method (CASS) 63±1℃
1.0~2.0 ml / 80cm2 / hr
Salt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2
Brine Tank Capacity
Multiple Safety Protection Devices
Current discharge protection, over pressure protection, over temperature protection, over load fuse protection
Testing Salt / Measuring tank / Spray Nozzle x 1 set
Air pump (provided by buyer)
ASTM B117-08, ISO 9227...
Presssure Regulating Valve
The pressure regulating valve is used for adjusting the pressure inside the chamber when the air pressure is over high or low
The pressure gage can display the pressure value when the heated air reaches the nozzle by going throug the Saturated air tank.
Gather the volume of spray of each test 50ml per degree