Temperature Shock Chambers
Temperature Shock Chambers can test the material’s chemical change or physics change by expansion and contraction in high and low temperature environment within short time.
this type climatic environmental shcok test chamber is application to metal, plastic, rubber, electronic etc materials and can be used for product improvement’s reference.
1） Perfect outlook upgrades, easy operation
2） The color touch microcomputer temperature controller was made in Japan which can display Chinese / English Vertical structure with 3 chambers, high low temperature shock cycling can be automatic control, remain and change time can be adjustable, stainless steel inner material, several record methods, so this environmental test chamber has various safety precautions and device.
3） Perfect protect alarming function: when it has condition with short circuit, work chamber over-temperature, leakage; compressor with over-pressure, over-load, oil pressure, water-break, the screen will automatic display the fault cause and provide exclusion method, and when the input voltage is unstable, due to it has the stop device that the remove time of high-low temperature shock structure within 10s.
4） The recovery time for this product within 5min and meet MTL, IEC, JIS, GJB etc standard.
Ln2 fast cooling control system
RS-232 RS-232C communication interface device, it can supervisory control and record by LAN with computer together
1） This environmental test chamber is divided into three sections: hot chamber, cold chamber and testing chamber. It’s using unique the heat protection structure, accumulation of hot and cold effect, heat and cold air course to guide into the specimen to make the temperature shock test.
2） The color touch microcomputer temperature controller（320*240dots）was made in Japan
3） High formula memory capacity may be set to 100 groups. The maximum cycle setting is 9999cycles. The maximum setting of each section is 999 Hrs 59 Min.
4） Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application. Both 2 zone and 3 zone chambers can be chosen.
5） Temperature Shock Chambers is the fully automatic and high precision program, and all process are precisely controlled by P.L.C.’S.
6） For the malfunctions, the machine will automatically shuts down and a warning light switches on. It can be shut down automatically in case of electrical power instabilities
4、 The main parameters:
(thermal shock chamber/high low temperature chamber) Related Products:
Model / Link
Interior Dimensions(W x D x H)
Want to know more details,please contact us "email@example.com"
Inside dimension：36×35×40cm（can be customized）
Outside dimension: 151×182×142cm
Test method: pneumatic door change into 2 zones or 3 zones shock chamber method
The hot chamber preheating temperature range: 60~200℃
Heating rate: 60→200℃about 20min
The cold chamber pre-cooling temperature range:-78→0℃
Cooling rate:20→-75℃about 70min
Test chamber temperature deviation: ±2℃
Temperature range: A:-40℃~+150℃，B:-55℃~150℃，C:-65℃~+150℃
Temperature recovery time: within 5min
The carrying capacity of specimen shelf: 30Kg
Specimen weight: 5 Kg
Material: Exterior material is cold-roll steel sheets with rust prevention or SUS#304 Stainless steel plate; Interior material is SUS#304 Stainless steel plate, heat-insulating material is PU foam and fiberglass
1）The hot chamber
Heater: nicochrome electric heater
Ventilator: centrifugal ventilator when exposed in high temperature or environment temperature, axial flow ventilator for preheating
2）The cold chamber
Heater, cooler; nicochrome electric heater, regenerator
Ventilator: centrifugal ventilator
Pneumatic cylinder: Temperature Shock Chambers can be used in each device when exposed for hot temperature, environment temperature, cold temperature
Air compressor: provide the compress air for pneumatic ventilator (option)
Cooling method: cascade refrigeration system
Refrigeration compressor: semi-closed piston
Freezing medium: R23/R404 environmental friendly
Condenser: Stainless steel plate-type heat exchanger
Operation interface: 6” Windows-based color touch screen with English version
Program’s memory capacity: 100 group user program (adjustable)
Set index range: Time: 1min~ 99h59min, cycling: 1~999times
resolution ratio: Temperature: 0.01 ℃, time 1 min
Input: T type thermocouple
Controlling method: PID control
other function: timer, over-temperature protection, sensor for choosing up & down wind, power cut protection, alarm record, test curve record, test suspend, display operation time of program
Power supply: AC380±10％V 50±0.5Hz, three-phase, four-wire+ protect earth wire
Power (k.w): 20, 21, 22
Cooling circulating water: Water pressure: 0.2~0.4MPa, water temperature: ≤30℃
Compressed air: 0.5~0.7MPa
5、Standard configuration: Light of chamber’s condition, timer 1pc, fairlead (25x100mm) 1pc, trundle 4pcs, Levelers4pcs
6、Safety device: ground fault circuit interrupters, the chambers temperature is too high, lower protector, air evacuation valve, Sample power control terminals(contact capacity: AC 250V, 6Am), over-temperature protector switch for hot & cold chamber, over-temperature protector switch for hot & cold chamber( inside controller), compressor overpressure, over-heating protector, ventilator relay, temperature switch of electromotor, prevent relay of electromotor, pressure switch for air compressor, fuse, external alarming terminals (contact capacity: AC 250V, 2Am)
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist