Salt Spray Chamber for Corrosion Testing
Salt Spray Test Chamber for Corrosion Resistance is ideal for testing the resistance to salt spray corrosion of some products by measuring and comparing similar materials, their usability quality.Salt spray chamber is applicable to test salt spray corrosion resistance of such products as parts, electronic components, protective layer of metallic material and industrial products
Salt spray test chamber can do following testing:
Neutral salt spray test (NSS test)
Acetate spray test (ASS test)
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.
Internal Size (W*D*H)
External Size (W*D*H)
P.V.C rigid plastic plate, thickness 8mm
Diameter 10mm glass fiber rod, anti-rust
V-shape plastic steel to make sure sample in 15~30 degree inclined
Room temperature ~ 55℃
Continuous and Periodic spray type
Test Chamber Temperature
Salt Spray Method (NSS ACSS)35±1℃
Saturated air Barrel Temperature
Salt Spray Method (NSS ACSS)47±1℃
1.0~2.0 ml / 80cm2 / hr
Salt Spray Method (NSS ACSS6.5~7.2)
Brine Tank Capacity
Multiple Safety Protection Devices
Current discharge protection, over pressure protection, over temperature protection, over load fuse protection
Testing Salt / Measuring tank / Spray Nozzle x 1 set
1HP Air pump (provided by buyer)
ASTM B117-08, ISO 9227...
The table parameters is for the company Standard Model parameters, we support customer customization parameters