العربيةCookware Testing Equipment Series
Cookware Testing Equipment company,which focus on designing and sales Cookware Testing Equipment and committed to be a global leader of Cookware Testing solution supplier...
The blade is mounted in a position with the edge vertical and a pack of specially developed synthetic paper (Not included) is lowered on to it. The clamping fixture with the blade move back and forth the blade cuts into the paper, the depth of the cut bei
knives Strength testing equipment consists 2 clamps, one permanent clamp for the handle and the other removable clamp for the tip of specimen.
Aluminum Block with heater and thermo controller...
Cookware Bending Strength Tester
Special design fixture to hold the cookware firmly to the rigid base.
Loading point is easy to adjust.
Non-stick coatings Endurance Tester
A heating plate capable of heating the interior base of the utensil up to250 degree C, and maintain the temperature at 205 +/- 10 degree C.
Test apparatus for Resistance to Pull
Suitable for kitchen utensils and hands tensile resistance test
Cookware abrasion resistance tester
Reciprocating support, for mounting the item of cookware under test , capable of controlled horizontal movement of the item of 100+/-5mm in each direction at an average speed of 6.5+/-0.2m/min.
Rotatable Drum Inspection Machine
1.Tailor-made by customer specfication
2.Hong Kong sales office
The blade is mounted in a position with the edge vertical and a pack of specially developed synthetic paper (Not included) is lowered on to knives sharpness tester.
This Rust resistance testing equipment is simulated the daily case of corrosion of cutlery and also other stainless steel cutlery.
This Knives Test Tool is widely used in knife or carving fork, Clamped at the handle and loaded at the dlade or prong tip , is raised until the load is just lifted.The angle of permanent deformation after release of the load is measured.
Kitchenware tester is used for testing the handle life fo cauldron, pot and other kitchen utensil. it is mainly stimulated the daily using of cauldron handle.
Cutlery corrosion resistance tester is suitable for cutlery, Knife ,Fork and other Stainless steel cutlery.
It is widely used in knife or carving fork, clamped at the handle and loaded at the dlade or prong tip , is raised until the load is just lifted. The angle of permanent deformation after release of the load is measured
Rotatable Drum Inspection Machine
Specifications
Rotatable Drum Inspection Machine
1.Tailor-made by customer specfication
2.Hong Kong sales office
-
cookware Knives Testing EquipmentThe blade is mounted in a position with the edge vertical and a pack of specially developed synthetic paper (Not included) is lowered on to it. The clamping fixture with the blade move back and forth the blade cuts into the paper, the depth of the cut beiInquire
-
knives Strength testing equipmentknives Strength testing equipment consists 2 clamps, one permanent clamp for the handle and the other removable clamp for the tip of specimen.Inquire
-
Aluminum Block with heater and thermo controllerAluminum Block with heater and thermo controller...Inquire
-
Cookware Bending Strength TesterCookware Bending Strength Tester Special design fixture to hold the cookware firmly to the rigid base. Loading point is easy to adjust.Inquire
-
Non-stick coatings Endurance TesterNon-stick coatings Endurance Tester A heating plate capable of heating the interior base of the utensil up to250 degree C, and maintain the temperature at 205 +/- 10 degree C.Inquire
-
Handle Resistance To Pull TesterTest apparatus for Resistance to Pull Suitable for kitchen utensils and hands tensile resistance testInquire
-
Cookware abrasion resistance testerCookware abrasion resistance tester Reciprocating support, for mounting the item of cookware under test , capable of controlled horizontal movement of the item of 100+/-5mm in each direction at an average speed of 6.5+/-0.2m/min.Inquire
-
Rotatable Drum Test MachineRotatable Drum Inspection Machine 1.Tailor-made by customer specfication 2.Hong Kong sales officeInquire
-
Kitchen Knives Sharpness TesterThe blade is mounted in a position with the edge vertical and a pack of specially developed synthetic paper (Not included) is lowered on to knives sharpness tester.Inquire
-
Cookware resistance testing equipmentThis Rust resistance testing equipment is simulated the daily case of corrosion of cutlery and also other stainless steel cutlery.Inquire
-
Knives Test EquipmentThis Knives Test Tool is widely used in knife or carving fork, Clamped at the handle and loaded at the dlade or prong tip , is raised until the load is just lifted.The angle of permanent deformation after release of the load is measured.Inquire
-
Cooking Pot Handle Fatigue TesterKitchenware tester is used for testing the handle life fo cauldron, pot and other kitchen utensil. it is mainly stimulated the daily using of cauldron handle.Inquire
-
Cutlery corrosion resistanceCutlery corrosion resistance tester is suitable for cutlery, Knife ,Fork and other Stainless steel cutlery.Inquire
-
Knives Test ToolIt is widely used in knife or carving fork, clamped at the handle and loaded at the dlade or prong tip , is raised until the load is just lifted. The angle of permanent deformation after release of the load is measuredInquire
-
Rotatable Drum Inspection MachineRotatable Drum Inspection Machine Specifications Rotatable Drum Inspection Machine 1.Tailor-made by customer specfication 2.Hong Kong sales officeInquire
I am product title
Pieces
Name：
Content：
E-mail：
